CUSTOMIZE PARAMETERS
NOTICE:
HINT:
The following items can be customized.
CUSTOMIZE METER / GAUGE SYSTEM
(a) Customizing with the Techstream
(1) Connect the Techstream to the DLC3.
(2) Turn the ignition switch to ON.
(3) Turn the Techstream on.
(4) Enter the following menus: Customize Setting / Warning or Display.
(5) Select the setting by referring to the table below.
Warning|
Tester Display | Description |
Default | Setting |
ECU |
|---|---|---|---|---|
| Flasher Sound Volume Adjust |
Function to change the flasher sound volume |
Medium | $02:Large,$00:Medium,$01:Small |
Combination meter assembly |
|
Suggestion Service Function |
Function to change the suggestion service display setting |
ON | 00:OFF,01:Only Parked,11:ON |
Main body ECU (Multiplex network body ECU) |
|
Tester Display | Description |
Default | Setting |
ECU |
|---|---|---|---|---|
| ODO Display Time After IG OFF Adjust |
Function to change the ODO display time after the ignition switch is turned off |
30s | $00:30s,$01:60s,$02:600s,$03:OFF |
Combination meter assembly |
|
ECO Drive Indicator Zone Display Function (Meter) |
Function to enable/disable the eco driving indicator zone |
ON | $00:OFF,$01:ON |
Combination meter assembly |
(b) Customizing with the multi-display
(1) Turn the ignition switch to ON.
(2) Enter the following menus: MENU / Setup / Vehicle / Vehicle Customization / Convenience Services.
(3) Select the setting by referring to the table below.
|
Display | Default |
Content | Setting |
Relevant ECU |
|---|---|---|---|---|
| Convenience Services |
On | Function to change the suggestion service display setting |
On, On During, Off | Main body ECU (Multiplex network body ECU) |
Lost Communication with Meter (B1324,B1325)
Auto Down Operation does not Fully Open Power Window (Catch Protection Function is Activated)