Toyota Camry owners & service manuals

Toyota Camry (XV70): Glass Position Initialization Incomplete (B2313)

Toyota Camry Repair Manual XV70 (2018-2024) / Vehicle Exterior / Window / Glass / Power Window Control System / Glass Position Initialization Incomplete (B2313)

DESCRIPTION

The power window regulator motor assemblies are operated by the multiplex network master switch assembly, power window regulator switch assembly or rear power window regulator switch assemblies. The power window regulator motor assembly has motor, regulator and ECU functions.

When the ECU built into a power window regulator motor assembly determines that the power window regulator motor assembly has not been initialized, DTC B2313 is stored.

D-Door Motor

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

B2313

Glass Position Initialization Incomplete
  • Power window regulator motor assembly (for driver door) not initialized
  • Power window regulator motor assembly (for driver door) is malfunctioning
  • Battery disconnected when ignition switch ON
  • Power window regulator motor assembly (for driver door) not initialized
  • Power window regulator motor assembly (for driver door)
P-Door Motor

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

B2313

Glass Position Initialization Incomplete
  • Power window regulator motor assembly (for front passenger door) not initialized
  • Power window regulator motor assembly (for front passenger door) is malfunctioning
  • Battery disconnected when ignition switch ON
  • Power window regulator motor assembly (for front passenger door) not initialized
  • Power window regulator motor assembly (for front passenger door)
RL-Door Motor

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

B2313

Glass Position Initialization Incomplete
  • Power window regulator motor assembly (for rear LH door) not initialized
  • Power window regulator motor assembly (for rear LH door) is malfunctioning
  • Battery disconnected when ignition switch ON
  • Power window regulator motor assembly (for rear LH door) not initialized
  • Power window regulator motor assembly (for rear LH door)
RR-Door Motor

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

B2313

Glass Position Initialization Incomplete
  • Power window regulator motor assembly (for rear RH door) not initialized
  • Power window regulator motor assembly (for rear RH door) is malfunctioning
  • Battery disconnected when ignition switch ON
  • Power window regulator motor assembly (for rear RH door) not initialized
  • Power window regulator motor assembly (for rear RH door)

CAUTION / NOTICE / HINT

NOTICE:

  • DTC B2313 is stored in each power window regulator motor assembly.
  • If the battery is disconnected while the ignition switch is ON, DTC B2313 will be stored.
  • If a power window regulator motor assembly has been replaced with a new one, initialize the power window control system.

    Click here

PROCEDURE

1.

PERFORM INITIALIZATION (APPLICABLE LOCATION)

(a) Turn the ignition switch to ON.

(b) Initialize the power window regulator motor assembly.

Click here

HINT:

Initialize the power window regulator motor assembly that has DTC B2313 stored in its ECU.

NEXT

2.

CHECK DTC OUTPUT

(a) Turn the ignition switch off.

(b) Wait for at least 10 seconds, and then turn the ignition switch to ON.

(c) Check for DTCs.

Body Electrical > D-Door Motor > Trouble Codes Body Electrical > P-Door Motor > Trouble Codes Body Electrical > RL-Door Motor > Trouble Codes Body Electrical > RR-Door Motor > Trouble Codes

HINT:

Check for DTCs for the power window regulator motor assembly that had DTC B2313 stored in its ECU.

OK:

DTC B2313 is not output.

Result

Proceed to

OK

A

NG (Driver door power window)

B

NG (Front passenger door power window)

NG (Rear LH door power window)

C

NG (Rear RH door power window)
A

END (POWER WINDOW CONTROL SYSTEM HAS NOT BEEN INITIALIZED)
B

REPLACE POWER WINDOW REGULATOR MOTOR ASSEMBLY (FOR DRIVER DOOR OR FRONT PASSENGER DOOR)

C

REPLACE POWER WINDOW REGULATOR MOTOR ASSEMBLY (FOR REAR LH DOOR OR REAR RH DOOR)

    READ NEXT:

     Remote Up / Down Function does not Operate

    DESCRIPTION When the ignition switch is ON, the multiplex network master switch assembly sends remote up and down signals to each power window regulator motor assembly via LIN communication. WIRING DI

     Driver Side Power Window does not Operate with Power Window Master Switch

    DESCRIPTION When the ignition switch is ON, the power window regulator motor assembly (for driver door) is operated by the multiplex network master switch assembly. The power window regulator motor as

     Front Passenger Side Power Window does not Operate with Front Passenger Side Power Window Switch

    DESCRIPTION When the ignition switch is ON, the power window regulator motor assembly (for front passenger door) is operated by the power window regulator switch assembly. The power window regulator m

    SEE MORE:

     Cooling System

    On-vehicle InspectionON-VEHICLE INSPECTION CAUTION / NOTICE / HINT CAUTION: Do not remove the radiator cap sub-assembly while the engine and radiator assembly are still hot. Pressurized, hot engine coolant and steam may be released and cause serious burns. PROCEDURE 1. INSPECT FOR COOLANT LEA

     Parts Location

    PARTS LOCATION ILLUSTRATION *1 ECM *2 ENGINE ROOM RELAY BLOCK AND JUNCTION BLOCK ASSEMBLY - INJ FUSE *3 IGNITION COIL ASSEMBLY *4 SPARK PLUG

    © 2023-2026 Copyright www.tocamry.com