Toyota Camry (XV70): Installation
Toyota Camry Repair Manual XV70 (2018-2024) / Steering / Steering Gear / Linkage / Steering Gear / Installation
INSTALLATION
PROCEDURE
1. INSTALL STEERING GEAR HEAT INSULATOR (for 2GR-FKS)
| (a) Install the steering gear heat insulator to the rack and pinion power steering gear assembly with the 2 bolts in the order shown in the illustration. Torque: 8.0 N |
READ NEXT:
SEE MORE:
Transmission Range Sensor "A" Circuit Open (P070513,P070562)
DESCRIPTION The park/neutral position switch assembly detects the shift position and sends signals to the ECM.
DTC No. Detection Item
DTC Detection Condition Trouble Area
MIL Memory
Note P070513
Transmission Range Sensor "A" Circuit Open
All switches are of
Pressure Control Solenoid "D" Actuator Stuck Off (P27137F)
DESCRIPTION Based on signals from the accelerator position sensor and transmission revolution sensors (NT and NC), the ECM controls the solenoid (SLT) valve using a predetermined current. As a result, the line pressure is adjusted to a pressure that is appropriate for the throttle angle and engine o
© 2023-2025 Copyright www.tocamry.com
