Toyota Camry (XV70): Reassembly

Toyota Camry Repair Manual XV70 (2018-2024) / Vehicle Interior / Meter / Gauge / Display / Combination Meter / Reassembly

REASSEMBLY

CAUTION / NOTICE / HINT

NOTICE:

When removing and installing the combination meter glass, make sure not to touch the display panel.
Do not allow any dirt, fingerprints, grease, etc., to adhere to the combination meter glass. If the glass is dirty, wipe it clean with a soft cloth.

PROCEDURE

1. INSTALL COMBINATION METER GLASS

(a) Engage the 8 claws to install the combination meter glass.

Install in this Direction

SEE MORE:

Check Bus 2 Lines for Short Circuit

DESCRIPTION There may be a short circuit between the CAN main bus lines and/or CAN branch lines when the resistance between terminals 18 (CA4H) and 17 (CA4L) of the central gateway ECU (network gateway ECU) is below 54 Ω. Symptom Trouble Area Resistance between terminals 18 (CA4

Starter Signal Circuit

DESCRIPTION While the engine is being cranked, current flows from terminal STAR of the certification ECU (smart key ECU assembly) to the park/neutral position switch assembly and to terminal STA of the ECM (STA signal). WIRING DIAGRAM Refer to DTC P061512. Click here CAUTION / NOTICE / HINT

Toyota Camry (XV70): Reassembly

READ NEXT:

SEE MORE:

Check Bus 2 Lines for Short Circuit

Starter Signal Circuit