Toyota Camry (XV70): Sending Malfunction (Navigation to APGS) (U0073,U0100,U0129,U0140,U0155,U0164,U0198,U023B,U0265,U1110)
DESCRIPTION
These DTCs are stored when a malfunction occurs in the CAN communication circuit.
|
DTC No. | Detection Item |
DTC Detection Condition | Trouble Area |
|---|---|---|---|
|
U0073 | Sending Malfunction (Navigation to APGS) |
CAN bus connection error |
CAN communication system |
|
U0100 | Engine ECU Communication |
CAN reception error | CAN communication system |
|
U0129 | VSC(ECB)ECU Communication |
CAN reception error | CAN communication system |
|
U0140 | Lost Communication with Body Control Module |
CAN reception error | CAN communication system |
|
U0155 | Meter ECU Communication |
CAN reception error | CAN communication system |
|
U0164 | Air Conditioner ECU Communication |
CAN reception error | CAN communication system |
|
U0198 | Lost Communication with Telematic Control Module |
CAN reception error | CAN communication system |
|
U023B | Lost Communication with Image Processing Module "B" |
CAN reception error | CAN communication system |
|
U0265 | Lost Communication with Image Processing Sensor A |
CAN reception error | CAN communication system |
|
U1110 | Clearance Sonar ECU Communication |
CAN reception error | CAN communication system |
PROCEDURE
| 1. |
CHECK DTC |
(a) Clear the DTCs.
Body Electrical > Navigation System > Clear DTCs(b) Recheck for DTCs and check that no DTCs are output.
Body Electrical > Navigation System > Trouble CodesOK:
No DTCs are output.
| OK | .gif) |
USE SIMULATION METHOD TO CHECK |
.gif)
| NG | | GO TO CAN COMMUNICATION SYSTEM |
READ NEXT:
Satellite Radio Broadcast cannot be Received
CAUTION / NOTICE / HINT NOTICE: Some satellite radio broadcasts require payment. A contract must be made between a satellite radio company and the user. If the contract expires, it will not be possibl
Satellite Radio Broadcast cannot be Selected or After Selecting Broadcast, Broadcast cannot be Added into Memory
CAUTION / NOTICE / HINT NOTICE: Some satellite radio broadcasts require payment. A contract must be made between a satellite radio company and the user. If the contract expires, it will not be possibl
Noise Occurs
PROCEDURE
1. CHECK NOISE CONDITION
(a) Check from which direction the noise comes (front left or right, or rear left or right).
OK: The location of the noise source can be determined.
SEE MORE:
Cold Start Ignition Timing Performance (P050B00)
MONITOR DESCRIPTION This monitor will run when the engine is started at an engine coolant temperature of -10 to 50°C (14 to 122°F). The DTC is stored after the engine idles for 13 seconds (2 trip detection logic).
The DTC is designed to monitor the ignition timing at cold start. When the engine
Inspection
INSPECTION PROCEDURE 1. INSPECT SOLENOID (SL) VALVE
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection Condition
Specified Condition
Solenoid (SL) valve connector terminal - Solenoid (SL) valve body
