TERMINALS OF ECU
COMBINATION METER ASSEMBLY
(a) Measure the voltage and resistance and check for pulses according to the value(s) in the table below.
|
Terminal No. (Symbol) | Wiring Color |
Signal Input/Output | Condition |
Specified Condition |
|---|---|---|---|---|
|
K21-1 (ILL-) - Body ground |
LA-L - Body ground | Output |
Taillights off > on | Below 1 V > Pulse generation |
|
K21-2 (EP) - Body ground |
W-B - Body ground | - |
Always | Below 1 ? |
|
K21-4 (INT) - Body ground |
L - Body ground | Output |
Ignition switch ON, OK switch on steering pad switch not pushed |
8 to 15 V |
|
K21-5 (SI) - Body ground |
W - Body ground | Input |
Ignition switch ON, wheel being rotated |
Pulse generation (See waveform 1) |
|
K21-6 (+S) - Body ground |
L - Body ground | Output |
Ignition switch ON, wheel being rotated |
Pulse generation (See waveform 1) |
|
K21-7 (VCM) - Body ground |
BE - Body ground | Input |
Engine started, vacuum warning switch off (brake warning light off) > on (brake warning light on) |
11 to 14 V > Below 1 V |
|
K21-9 (S)*1 - Body ground |
LA-R - Body ground | Input |
Engine started > not started |
11 to 14 V > Below 1 V |
|
K21-12 (SW) - Body ground |
G - Body ground | Input |
Ignition switch ON, brake fluid level not low (brake warning light off) > low (brake warning light on) |
11 to 14 V > Below 1 V |
|
K21-14 (FR) - K21-33 (FE) |
| Input |
Ignition switch ON, fuel level full > low (fuel level warning light on) |
Pulse generation (See waveform 2) |
|
K21-15 (FV) - Body ground |
| Input |
Ignition switch ON | Pulse generation (See waveform 3) |
|
K21-17 (WLVL) - Body ground |
LG - Body ground | Input |
Ignition switch ON, washer fluid level not low > low |
11 to 14 V > Below 1 V |
|
K21-18 (RLMT) -Body ground |
BE - Body ground | Output |
Ignition switch ON, rear seat belt warning light LH off > on |
11 to 14 V > Below 1 V |
|
K21-19 (RCMT) -Body ground |
R - Body ground | Output |
Ignition switch ON, rear seat belt warning light center off > on |
11 to 14 V > Below 1 V |
|
K21-20 (RRMT) -Body ground |
G - Body ground | Output |
Ignition switch ON, rear seat belt warning light RH off > on |
11 to 14 V > Below 1 V |
|
K21-21 (ES) - Body ground |
W-B - Body ground | - |
Always | Below 1 ? |
|
K21-24 (RLSB) - Body ground |
SB - Body ground | Input |
Ignition switch ON, rear seat belt LH unfastened > fastened |
Below 1 V > 11 to 14 V |
|
K21-25 (RCSB) - Body ground |
B - Body ground | Input |
Ignition switch ON, rear seat belt center unfastened > fastened |
Below 1 V > 11 to 14 V |
|
K21-26 (RRSB) - Body ground |
LG - Body ground | Input |
Ignition switch ON, rear seat belt RH unfastened > fastened |
Below 1 V > 11 to 14 V |
|
K21-27 (OILW) - Body ground |
W - Body ground | Input |
Ignition switch ON, engine oil level not low > low |
Below 1 V > 11 to 14 V |
|
K21-28 (MSM+) - Body ground |
GR - Body ground | Input |
Ignition switch ON, up, down, right and left switches on steering pad switch not pushed |
4.8 to 5.2 V |
|
K21-29 (MSTI) - Body ground |
R - Body ground | Input |
Ignition switch ON, OK and back switches on steering pad switch not pushed |
4.8 to 5.2 V |
|
K21-31 (CANL) | W |
Input/Output | - |
- |
| K21-32 (CANH) |
B | Input/Output |
- | - |
|
K21-33 (FE) - Body ground |
| - |
Always | Below 1 ? |
|
K21-35 (FR2) - K21-33 (FE)*3 |
V - SB | Input |
Ignition switch ON, fuel level full > low (fuel level warning light on) |
Pulse generation (See waveform 2) |
|
K21-36 (TX+)*2 | G |
Input/Output | - |
- |
| K21-37 (TX-)*2 |
W | Input/Output |
- | - |
|
K21-39 (IG+) - Body ground |
LA-GR - Body ground | Input |
Ignition switch off > Ignition switch ON |
Below 1 V > 11 to 14 V |
|
K21-40 (B) - Body ground |
LA-B - Body ground | Input |
Always | 11 to 14 V |
|
K20-1 (ODO) - Body ground |
LA-L - Body ground | Input |
Ignition switch ON, ODO/TRIP switch not pushed |
4.8 to 5.2 V |
|
K20-2 (TR) - Body ground |
L - Body ground | Input |
Ignition switch ON, light control rheostat up switch and light control rheostat down switch not pushed |
4.8 to 5.2 V |
|
K20-3 (HAZ) - Body ground |
LA-R - Body ground | Input |
Hazard warning signal switch off > pushed |
11 to 14 V > Below 1 V |
|
K20-5 (SW3) - Body ground |
LA-B - Body ground | - |
Always | Below 1 ? |
|
K20-7 (LR) - Body ground |
LA-G - Body ground | Output |
Ignition switch ON, RH turn indicator light off > blinking |
Below 1 V > 11 to 14 V <> Below 1 V |
|
K20-8 (B) - Body ground |
LA-B - Body ground | Input |
Always | 11 to 14 V |
|
K20-10 (TRNL) - Body ground |
BE - Body ground | Output |
Ignition switch ON, LH turn indicator light off > blinking |
Below 1 V > 11 to 14 V <> Below 1 V |
|
K20-11 (LL) - Body ground |
LA-LG - Body ground | Output |
Ignition switch ON, LH turn indicator light off > blinking |
Below 1 V > 11 to 14 V <> Below 1 V |
|
K20-13 (TRNR) - Body ground |
BE - Body ground | Output |
Ignition switch ON, RH turn indicator light off > blinking |
Below 1 V > 11 to 14 V <> Below 1 V |
|
Item |
Condition |
|---|---|
|
Tester connection |
|
|
Tool setting |
5 V/DIV., 20 ms./DIV. |
|
Condition |
Ignition switch ON, wheel being rotated |
HINT:
When the system is functioning normally, one wheel revolution generates 4 pulses. As the vehicle speed increases, the width indicated by (A) in the illustration narrows.
|
Item |
Condition |
|---|---|
| *: for AWD | |
|
Tester connection |
|
|
Tool setting |
2.5 V/DIV., 20 ms./DIV. |
|
Condition |
Ignition switch ON, fuel level full > low (fuel level warning light on) |
HINT:
The magnitude of the voltage (A) changes as shown in the following tables.
|
Condition |
Voltage |
|---|---|
|
Ignition switch ON, fuel level full |
4.0 to 4.6 V |
|
Ignition switch ON, fuel level low (fuel level warning light on) |
0.3 to 1.5 V |
|
Condition |
Voltage |
|
|---|---|---|
|
K21-14 (FR) - K21-33 (FE) |
K21-35 (FR2) - K21-33 (FE) |
|
|
Ignition switch ON, fuel level full |
4.2 to 4.6 V |
4.0 to 4.6 V |
|
Ignition switch ON, fuel level 1/2 |
4.2 to 4.6 V |
0.3 to 0.7 V |
|
Ignition switch ON, fuel level low (fuel level warning light on) |
0.3 to 1.5 V |
0.3 to 0.7 V |
|
Item |
Condition |
|---|---|
|
Tester connection |
K21-15 (FV) - Body ground |
|
Tool setting |
2.5 V/DIV., 20 ms./DIV. |
|
Condition |
Ignition switch ON |
|
Standard voltage |
4.5 to 5.5 V |
Reassembly
Installation