Toyota Camry (XV70): Customize Parameters
CUSTOMIZE PARAMETERS
NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
HINT:
The following items can be customized.
CUSTOMIZE CLOCK SYSTEM
(a) Customizing with the multi-display
(1) Turn the ignition switch to ON.
(2) Enter the following menus: MENU / Setup / Clock.
(3) Select the setting by referring to the table below.
|
Display | Default |
Description | Setting |
Relevant ECU |
|---|---|---|---|---|
| Time Zone |
* | Setting for clock time zone |
* | Radio and display receiver assembly |
|
Daylight Saving Time |
On | Setting for clock daylight saving time |
On, Off or Auto | Radio and display receiver assembly |
|
Auto Adjust by GPS*2 |
On | Setting for clock auto adjust by GPS |
On or Off | Radio and display receiver assembly |
|
24-Hour Time Format | Off |
Setting for clock 24-hour time format |
On or Off | Radio and display receiver assembly |
|
Hours | - |
Manual adjustment of clock hour |
-, +, AM or PM | Radio and display receiver assembly |
|
Minutes | - |
Manual adjustment of clock minute |
-, + or :00 | Radio and display receiver assembly |
- *: Changes according to the vehicle specification
HINT:
Depending on the specifications of the vehicle, some items may not be displayed.
(b) Customizing with the multi-information display
(1) Turn the ignition switch to ON.
(2) Select the settings tab on the screen of the multi-information display.
(3) Choose the following items and perform customization of the clock (combination meter assembly).
|
Display | Description |
ECU |
|---|---|---|
|
Clock Setting | Set minutes to 00 |
Combination meter assembly |
|
12H/24H setting and clock adjustment |
READ NEXT:
SEE MORE:
XM Tuner Antenna Disconnected (B15FE,B15FF)
DESCRIPTION These DTCs are stored when a malfunction occurs in the roof antenna assembly which is connected to the radio and display receiver assembly.
DTC No. Detection Item
DTC Detection Condition Trouble Area
B15FE XM Tuner Antenna Disconnected
The telephone antenna
Relay
On-vehicle InspectionON-VEHICLE INSPECTION PROCEDURE
1. INSPECT MAGNETIC CLUTCH RELAY (for 2GR-FKS)
*a Component without harness connected (Magnetic Clutch Relay)
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection C
