Toyota Camry (XV70): Relay
On-vehicle Inspection
ON-VEHICLE INSPECTION
PROCEDURE
1. INSPECT MAGNETIC CLUTCH RELAY (for 2GR-FKS)
|
*a | Component without harness connected (Magnetic Clutch Relay) |
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
|
Tester Connection | Condition |
Specified Condition |
|---|---|---|
|
3 - 5 | Battery voltage applied between terminal 1 and 2 |
Below 1 ? |
|
3 - 5 | Battery voltage not applied between terminal 1 and 2 |
10 k? or higher |
READ NEXT:
Components
COMPONENTS ILLUSTRATION
*1 COOLER (ROOM TEMP. SENSOR) THERMISTOR
*2 LOWER CENTER INSTRUMENT PANEL FINISH PANEL
*3 LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY
*4 NO. 1
Removal
REMOVAL PROCEDURE 1. REMOVE NO. 1 METER HOOD CLUSTER
Click here
2. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY
Click here
3. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL Cl
SEE MORE:
Installation
INSTALLATION CAUTION / NOTICE / HINT
NOTICE: Make sure to hold the front wiper arm while lifting it as lifting the front wiper arm by the front wiper blade may damage or deform the front wiper blade. PROCEDURE
1. INSTALL WINDSHIELD WIPER MOTOR ASSEMBLY (a) Using a T30 "TORX" socket wrench, ins
Initialization
INITIALIZATION INITIALIZE POWER WINDOW CONTROL SYSTEM (ALL DOORS)
NOTICE:
When a door window regulator sub-assembly, power window regulator motor assembly, door glass or door glass run is reinstalled or replaced, the power window control system must be initialized. Functions such as the aut
© 2023-2026 Copyright www.tocamry.com
