Toyota Camry (XV70): Installation
INSTALLATION
CAUTION / NOTICE / HINT
NOTICE:
Make sure to hold the front wiper arm while lifting it as lifting the front wiper arm by the front wiper blade may damage or deform the front wiper blade.
PROCEDURE
1. INSTALL WINDSHIELD WIPER MOTOR ASSEMBLY
(a) Using a T30 "TORX" socket wrench, install the windshield wiper motor assembly to the wiper link assembly with the 2 bolts.
Torque:
7.5 N
READ NEXT:
ComponentsCOMPONENTS ILLUSTRATION
*1 FRONT WIPER BLADE
*2 WIPER RUBBER
*3 FRONT WIPER RUBBER BACKING PLATE
- - ReplacementREPLACEMENT CAUTION / NOTICE /
On-vehicle InspectionON-VEHICLE INSPECTION PROCEDURE
1. INSPECT WIPER RELAY
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester
ComponentsCOMPONENTS ILLUSTRATION
*1 LEVEL WARNING SWITCH ASSEMBLY
- - RemovalREMOVAL CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initializ
SEE MORE:
CAUTION / NOTICE / HINT NOTICE: After replacing the skid control ECU (brake actuator assembly), perform acceleration sensor zero point calibration and system information memorization.
Click here
PROCEDURE
1.
PRE-INSPECTION (a) Brake pedal inspection
(1) Perform a visual inspec
DESCRIPTION If the forward recognition camera cannot verify the vehicle information sent from the skid control ECU (brake actuator assembly), the forward recognition camera stores DTC U031851.
DTC No. Detection Item
DTC Detection Condition Trouble Area
DTC Output from
U03