Toyota Camry (XV70): Installation
INSTALLATION
CAUTION / NOTICE / HINT
HINT:
- Use the same procedure for the RH side and LH side.
- The following procedure is for the LH side.
PROCEDURE
1. INSTALL REAR DOOR COURTESY LIGHT SWITCH ASSEMBLY
(a) Connect the connector.
(b) Using a T30 "TORX" socket wrench, install the rear door courtesy light switch assembly with the screw.
Torque:
6.3 N·m {64 kgf·cm, 56 in·lbf}
2. INSTALL REAR SIDE SEATBACK ASSEMBLY (for Fold Down Seat Type)
Click here .gif)
3. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP (for Fold Down Seat Type)
Click here
4. INSTALL REAR SEAT CUSHION LOCK HOOK (for Fold Down Seat Type)
Click here
5. INSTALL REAR SEAT CUSHION ASSEMBLY (for Fold Down Seat Type)
Click here
6. INSTALL REAR SEAT ASSEMBLY (for Fixed Seat Type)
Click here
7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
for A25A-FKS:
Click here
for 2GR-FKS:
Click here
8. PERFORM DIAGNOSTIC SYSTEM CHECK
Click here
9. INSPECT SRS WARNING LIGHT
Click here
READ NEXT:
SEE MORE:
Installation
INSTALLATION PROCEDURE 1. TEMPORARILY INSTALL FUEL (ENGINE ROOM SIDE) PUMP ASSEMBLY
(a) Turn the crankshaft pulley until the flat of the camshaft faces the fuel pump lifter assembly.
HINT: This prevents the camshaft nose from pushing up the fuel pump lifter assembly when installing the fuel
How To Proceed With Troubleshooting
CAUTION / NOTICE / HINT
HINT:
Use the following procedure to troubleshoot the air conditioning system.
*: Use the Techstream.
PROCEDURE
1. VEHICLE BROUGHT TO WORKSHOP
NEXT
2.
CUSTOMER PROBLEM ANALYSIS
HINT:
In troubleshooting, confirm that
