PROBLEM SYMPTOMS TABLE
NOTICE:
When replacing the combination meter assembly, always replace it with a new one. If a combination meter assembly which was installed to another vehicle is used, the information stored in it will not match the information from the vehicle and a DTC may be stored.
HINT:
|
Symptom | Suspected Area |
Link |
|---|---|---|
|
Headup display is not displayed |
Wire harness or connector |
- |
| Read the Data List (Display Change Switch) |
| |
|
Meter mirror sub-assembly |
| |
|
Combination meter assembly |
| |
|
Brightness of the headup display does not change |
Check customize parameters (HUD Brightness/Position) |
|
|
Perform Active Test (Display Brightness) |
| |
|
Read the Data List (Brightness Up Switch, Brightness Down Switch) |
| |
|
Meter mirror sub-assembly |
| |
|
Combination meter assembly |
| |
|
Headup display is not displayed in the correct position |
Check customize parameters (HUD Brightness/Position) |
|
|
Perform Active Test (Display Position) |
| |
|
Read the Data List (Projection Position Up Switch, Projection Position Down Switch) |
| |
|
Meter mirror sub-assembly |
| |
|
Combination meter assembly |
| |
|
Other headup display malfunction (Other systems are normal) |
Meter mirror sub-assembly |
|
Utility
Components