Toyota Camry (XV70): Terminals Of Ecu
TERMINALS OF ECU
CHECK AIR CONDITIONING AMPLIFIER ASSEMBLY
Click here
CHECK AIR CONDITIONING CONTROL ASSEMBLY
Click here
READ NEXT:
DIAGNOSIS SYSTEM CHECK DLC3 (a) Check the DLC3.
Click here INSPECT BATTERY VOLTAGE
(a) Measure the battery voltage. Standard Voltage: 11 to 14 V
If the voltage is below 11 V, recharge or r
DATA LIST / ACTIVE TEST ACTIVE TEST HINT:
Using the Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive f
DESCRIPTION When the mirror heater switch (rear window defogger switch) on the air conditioning control assembly is pressed, the operation signal is sent to the air conditioning amplifier assembly via
SEE MORE:
REMOVAL CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during engine oil level sensor removal/installation are shown below. Necessary Procedure After Parts Removed
INSTALLATION PROCEDURE 1. INSTALL SLIDING ROOF HOUSING ASSEMBLY
(a) Loosen the 4 bolts of the brackets of the sliding roof housing assembly.
(b) Temporarily install the sliding roof housing assembly with the 6 nuts and 8 bolts.
(c) Tighten the 2 nuts.
HINT: Tighten the 2 nuts in the ord