Toyota Camry owners & service manuals

Toyota Camry (XV70): Customize Parameters

CUSTOMIZE PARAMETERS

CUSTOMIZE POWER DOOR LOCK CONTROL SYSTEM

HINT:

The following items can be customized.

NOTICE:

  • When the customer requests a change in a function, first make sure that the function can be customized.
  • Be sure to make a note of the current settings before customizing.
  • When troubleshooting a function, first make sure that the function is set to the default setting.

(a) Customizing with the Techstream

(1) Connect the Techstream to the DLC3.

(2) Turn the ignition switch to ON.

(3) Turn the Techstream on.

(4) Enter the following menus: Customize Setting / Door Lock.

(5) Select the setting by referring to the table below.

Door Lock

Tester Display

Description

Default

Setting

ECU

Unlock Key Twice

Function that unlocks only the driver door when the driver door key cylinder is turned to unlock once, and unlocks all doors when it is turned to unlock twice. For the OFF setting, turning it once unlocks all doors.

ON

0:OFF,1:ON

Main body ECU (Multiplex network body ECU)

Automatic Door Lock Function

  • Link Shift: Function that locks all doors when the shift lever is moved out of P, with the ignition switch ON and all doors closed
  • Link Speed: Function that locks all of the doors when the vehicle speed reaches a certain level

Link Shift

00:OFF,01:Link Shift,10:Link Speed

Main body ECU (Multiplex network body ECU)

Automatic Door Unlock Function

  • Link D-door: Function that unlocks the other doors when the driver door is opened within approximately 43 seconds of the ignition switch being turned off
  • Link Shift: Function that unlocks all doors when the shift lever is moved to P from any position other than P with the ignition switch ON

Link Shift

00:OFF,01:Link D-door,10:Link Shift

Main body ECU (Multiplex network body ECU)

(b) Customizing with the multi-display

(1) Turn the ignition switch to ON.

(2) Enter the following menus: Setup / Vehicle / Vehicle Customization / Door Lock Settings.

(3) Select the setting by referring to the table below.

Display

Description

Default

Setting

Relevant ECU

Automatic Door Lock

  • By Shift from P: Function that locks all doors when the shift lever is moved out of P, with the ignition switch ON and all doors closed
  • By Speed: Function that locks all of the doors when the vehicle speed reaches a certain level

By Shift from P

By Speed, By Shift from P or Off

Main body ECU (Multiplex network body ECU)

Automatic Door Unlock

  • By Driver Door: Function that unlocks the other doors when the driver door is opened within approximately 43 seconds of the ignition switch being turned off
  • By Shift to P: Function that unlocks all doors when the shift lever is moved to P from any position other than P with the ignition switch ON

By Shift to P

By Shift to P, By Driver Door or Off

Main body ECU (Multiplex network body ECU)

    READ NEXT:

     Problem Symptoms Table

    PROBLEM SYMPTOMS TABLE HINT: Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of

     Terminals Of Ecu

    TERMINALS OF ECU CHECK INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY AND MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) (a) Remove the main body ECU (multiplex network body ECU) from the instrument panel jun

     Dtc Check / Clear

    DTC CHECK / CLEAR CHECK DTC (a) Connect the Techstream to the DLC3. (b) Turn the ignition switch to ON. (c) Turn the Techstream on. (d) Enter the following menus: Body Electrical / Main Body / Troub

    SEE MORE:

     On-vehicle Inspection

    ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT BRAKE FLUID LEVEL IN RESERVOIR Click here 2. INSPECT BRAKE BOOSTER ASSEMBLY Click here 3. INSPECT VACUUM WARNING SWITCH ASSEMBLY (a) Start the engine and stop it after 1 or 2 minutes. (b) Remove the battery. for A25A-FKS: Click here fo

     Alarm

    The alarm The alarm uses light and sound to give an alert when an intrusion is detected. The alarm is triggered in the following situations when the alarm is set: Vehicles without a smart key system A locked door is unlocked or opened in any way other than using the wireless remote cont

    © 2023-2026 Copyright www.tocamry.com