Toyota Camry (XV70): Dtc Check / Clear
Toyota Camry Repair Manual XV70 (2018-2024) / Vehicle Interior / Door Lock / Power Door Lock Control System / Dtc Check / Clear
DTC CHECK / CLEAR
CHECK DTC
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Main Body / Trouble Codes.
Body Electrical > Main Body > Trouble Codes(e) Check the details of the DTCs.
Click here
.gif)
CLEAR DTC
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Main Body / Clear DTCs
Body Electrical > Main Body > Clear DTCs(e) Clear the DTCs.
READ NEXT:
Data List / Active Test
DATA LIST / ACTIVE TEST DATA LIST HINT:
Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. T
Diagnostic Trouble Code Chart
DIAGNOSTIC TROUBLE CODE CHART Power Door Lock Control System
DTC No. Detection Item
Link B1243
GSW Terminal Circuit Malfunction
GSW Terminal Circuit Malfunction (B1243)
DESCRIPTION If the collision door lock release function does not operate normally, or an open or short in the GSW input circuit of the main body ECU (multiplex network body ECU) is detected, DTC B1243
SEE MORE:
Parts Location
PARTS LOCATION ILLUSTRATION
*A w/ Side Turn Signal Light
*B for A25A-FKS
*C for 2GR-FKS
- -
*1 HEADLIGHT ASSEMBLY LH
*2 HEADLIGHT ASSEMBLY RH
*3 SIDE TURN SIGNAL LIGHT ASSEMBLY LH
*4 SIDE TURN SIGNAL LIGHT ASSEMBLY R
Fail-safe Chart
FAIL-SAFE CHART FAIL-SAFE CHART Dynamic Torque Control AWD System
DTC No. Trouble Area
AWD Warning Message Fail-safe Operation
Memory Fail-safe Deactivation Condition
C120C Linear Solenoid Power Supply System Malfunction
Displayed Prohibited
Yes Igniti
© 2023-2026 Copyright www.tocamry.com
