Toyota Camry owners & service manuals

Toyota Camry (XV70): Customize Parameters

CUSTOMIZE PARAMETERS

CUSTOMIZE WIRELESS DOOR LOCK CONTROL SYSTEM

NOTICE:

  • When the customer requests a change in a function, first make sure that the function can be customized.
  • Be sure to make a note of the current settings before customizing.
  • When troubleshooting a function, first make sure that the function is set to the default setting.

HINT:

The following items can be customized.

(a) Customizing with the Techstream

(1) Connect the Techstream to the DLC3.

(2) Turn the engine switch on (IG).

(3) Turn the Techstream on.

(4) Enter the following menus: Customize Setting / Wireless Door Lock.

(5) Select the setting by referring to the table below.

Wireless Door Lock

Tester Display

Description

Default

Setting

ECU

Wireless Control

Function that turns the wireless door lock control system on or off

ON

0:OFF,1:ON

Main body ECU (Multiplex network body ECU)

Hazard Answer Back

Function that flashes the hazard warning lights once when the doors are locked by wireless operation and twice when the doors are unlocked by wireless operation

ON

0:OFF,1:ON

Main body ECU (Multiplex network body ECU)

Open Door Warning

Function that sounds a buzzer when the lock switch is pressed when any of the doors are ajar

ON

0:OFF,1:ON

Main body ECU (Multiplex network body ECU)

Unlock 2 Operation

Function that unlocks the driver door when the unlock switch on the electrical key transmitter sub-assembly is pressed once, and unlocks all of the doors when pressed twice. If this setting is OFF, pressing the unlock switch once unlocks all of the doors.

ON

0:OFF,1:ON

Main body ECU (Multiplex network body ECU)

Panic Function

Function that operates the theft deterrent system by pressing the panic switch on the electrical key transmitter sub-assembly for 0.8 seconds

ON

0:OFF,1:ON

Main body ECU (Multiplex network body ECU)

Trunk Lid Operation

Function to change the operation method of opening the luggage compartment door using the electrical key transmitter sub-assembly

1tim ON: Push the luggage door open switch once

2tim ON: Push the luggage door open switch twice

Long1: Push the luggage door open switch for 0.8 seconds

Long2: Push the luggage door open switch for 1.6 seconds

Prohibit: Wireless luggage compartment door open function is off

Long1

000:1tim ON,001:2tim ON,010:Long1,011:Long2,111:Prohibit

Main body ECU (Multiplex network body ECU)

Auto Lock Time

Function that regulates the interval between unlocking and automatic relocking of the doors

60 s

00:30 s,01:60 s,10:120 s

Main body ECU (Multiplex network body ECU)

Wireless Auto Lock

Function that turns the wireless auto lock function on or off

ON

0:OFF,1:ON

Main body ECU (Multiplex network body ECU)

Wireless Buzzer Resp

Function that enables/disables the wireless door lock buzzer response

ON

0:OFF,1:ON

Main body ECU (Multiplex network body ECU)

P/W Wireless Ope Buzz

Function that enables/disables the wireless power window buzzer response

ON

0:OFF,1:ON

Main body ECU (Multiplex network body ECU)

Wireless Buzzer Vol

Function that adjusts the wireless door lock buzzer volume

Level5

0000:Level7,0001:Level6,0010:Level5,0011:Level4,0100:Level3,0101:Level2,0110:Level1,0111:Level0

Main body ECU (Multiplex network body ECU)

Wireless Lock Function with Doors Open

Function that locks the doors automatically if the lock switch on the electrical key transmitter sub-assembly is pressed with any door open and then all of the doors are closed

ON

0:OFF,1:ON

Main body ECU (Multiplex network body ECU)

(b) Customizing with the multi-display

(1) Turn the engine switch on (IG).

(2) Enter the following menus: Setup / Vehicle / Vehicle Customization / Door Lock Settings.

(3) Select the setting by referring to the table below.

Display

Description

Default

Setting

Relevant ECU

Remote 2-Press Unlock

Function that unlocks the driver door when the unlock switch on the electrical key transmitter sub-assembly is pressed once, and unlocks all of the doors when pressed twice. If this setting is OFF, pressing the unlock switch once unlocks all of the doors

On

On or Off

Main body ECU (Multiplex network body ECU)

Wireless Lock When Door Opened

Function that locks the doors automatically if the lock switch on the electrical key transmitter sub-assembly is pressed with any door open and then all of the doors are closed

On

On or Off

Main body ECU (Multiplex network body ECU)

Auto Relock Timer

Function that regulates the interval between unlocking and automatic relocking of the doors

60 sec.

30 sec, 60 sec or 120 sec

Main body ECU (Multiplex network body ECU)

Lock/Unlock Feedback-Lights

Function that flashes the hazard warning lights once when the doors are locked by wireless operation and twice when the doors are unlocked by wireless operation

On

On or Off

Main body ECU (Multiplex network body ECU)

Lock/Unlock Feedback-Tone

Function that adjusts the wireless door lock buzzer volume

5

Off, 1, 2, 3, 4, 5, 6 or 7

Main body ECU (Multiplex network body ECU)

    READ NEXT:

     Problem Symptoms Table

    PROBLEM SYMPTOMS TABLE HINT: Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of

     Terminals Of Ecu

    TERMINALS OF ECU CHECK INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY AND MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) (a) Remove the main body ECU (multiplex network body ECU) from the instrument panel jun

     Dtc Check / Clear

    DTC CHECK / CLEAR NOTICE: If DTCs are output, save and check all output DTCs. When using the Techstream with the engine switch off, connect the Techstream to the DLC3 and turn a courtesy light sw

    SEE MORE:

     Installation

    INSTALLATION CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH side and LH side. The following procedure is for the LH side. PROCEDURE 1. INSTALL REAR AXLE HUB AND BEARING ASSEMBLY (a) Install the rear axle hub and bearing assembly and rear disc brake dust cover sub-ass

     Utility

    UTILITY REFRIGERANT HIGH PRESSURE HISTORY CLEAR (a) Connect the Techstream to the DLC3. (b) Turn the ignition switch to ON. (c) Press the OFF switch. (d) Turn the Techstream on. (e) Enter the following menus: Body Electrical / Air Conditioner / Utility / Refrigerant High Pressure History Clear. Bo

    © 2023-2026 Copyright www.tocamry.com