Toyota Camry (XV70): Customize Parameters
CUSTOMIZE PARAMETERS
CUSTOMIZE LIGHTING SYSTEM (INT)
NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
HINT:
The following items can be customized.
(a) Customizing using the Techstream
(1) Connect the Techstream to the DLC3.
(2) Turn the ignition switch to ON.
(3) Turn the Techstream on.
(4) Enter the following menus: Customize Setting / Illuminated Entry.
(5) Select the setting by referring to the table below.
Illuminated Entry|
Tester Display | Description |
Default | Setting |
ECU |
|---|---|---|---|---|
| Lighting Time |
Changes the lighting time of the following lights that are operated by the timer function when the door linked switch of the map light (roof console box sub-assembly) is on*1 or the switch of the room light assembly is in the DOOR position*2:
| 15 s |
10:30 s,00:15 s,01:7.5 s |
Main body ECU (Multiplex network body ECU) |
|
I/L when ACC OFF | Turns off the following lights automatically when the door linked switch of the map light (roof console box sub-assembly) is on*1 or the switch of the room light assembly is in the DOOR position*2 and the ignition switch is turned from ON or ACC to off:
| ON |
0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
|
I/L ON W/Door Key Unlock |
Lights up the following lights automatically when the door linked switch of the map light (roof console box sub-assembly) is on*1 or the switch of the room light assembly is in the DOOR position*2 and the doors are unlocked by an unlock operation:
| ON |
0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
|
Room Light when Aprchd |
Lights up the following lights when the door linked switch of the map light (roof console box sub-assembly) is on*1 or the switch of the room light assembly is in the DOOR position*2 and the electrical key transmitter sub-assembly is brought near the vehicle*4:
| ON |
0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
|
Inside Foot Light | Turns on the following lights:
| ON |
0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
|
Light Control | Dims the following lights when the ignition switch is ON and the shift lever is moved to any position other than P:
| ON |
0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
|
Interior Light Control |
Lights up the following lights:
| ON |
0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
|
Interior Illumination Light |
Turns on the following lights:
| ON |
0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
- *1: w/ Room Light (for LED Type)
- *2: w/ Room Light (for Bulb Type)
- *3: w/o Smart Key System
- *4: w/ Smart Key System
- *5: w/ Footwell Light
- *6: w/ Inside Handle Illumination Light
- *7: w/ Instrument Panel Ambient Illumination Light
(b) Customizing with the multi-display
(1) Turn the ignition switch to ON.
(2) Enter the following menus: MENU / Setup / Vehicle / Vehicle Customization / Lights Settings.
(3) Select the setting by referring to the table below.
|
Display | Default |
Content | Setting |
Relevant ECU |
|---|---|---|---|---|
| Interior Lights Auto-off Timer |
15 sec. | Changes the lighting time of the following lights that are operated by the timer function when the door linked switch of the map light (roof console box sub-assembly) is on*1 or the switch of the room light assembly is in the DOOR position*2:
| Off, 7.5 sec., 15 sec., 30 sec. |
Main body ECU (Multiplex network body ECU) |
- *1: w/ Room Light (for LED Type)
- *2: w/ Room Light (for Bulb Type)
- *3: w/o Smart Key System
- *4: w/ Footwell Light
- *5: w/ Inside Handle Illumination Light
- *6: w/ Instrument Panel Ambient Illumination Light
READ NEXT:
SEE MORE:
Relay
On-vehicle InspectionON-VEHICLE INSPECTION PROCEDURE
1. INSPECT HORN RELAY
*a Component without harness connected (HORN Relay)
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection Condition
Specifi
Yaw Rate Sensor Circuit Intermittent (C00631F,C006396,C05201F)
DESCRIPTION The airbag sensor assembly has a built-in yaw rate and acceleration sensor and detects the vehicle condition.
These DTCs are stored when the skid control ECU (brake actuator assembly) receives a malfunction signal from the yaw rate and acceleration sensor (airbag sensor assembly).
