Toyota Camry (XV70): Diagnosis System
DIAGNOSIS SYSTEM
DESCRIPTION
Air conditioning system data and Diagnostic Trouble Codes (DTCs) can be read through the Data Link Connector 3 (DLC3) of the vehicle. When the system seems to be malfunctioning, use the Techstream to check for malfunctions and perform troubleshooting.
CHECK DLC3
Check the DLC3.
Click here
READ NEXT:
DTC CHECK / CLEAR DTC CHECK USING TECHSTREAM (a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON. (c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical /
DATA LIST / ACTIVE TEST DATA LIST NOTICE:
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a p
DIAGNOSTIC TROUBLE CODE CHART Air Conditioning System (for Manual Air Conditioning System)
DTC No. Detection Item
DTC Detection Condition Link
B1412 Ambient Temperature Sensor Ci
SEE MORE:
INSTALLATION CAUTION / NOTICE / HINT
HINT:
Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
PROCEDURE 1. INSTALL OUTER MIRROR (for Type A)
(a) w/o Blind Spot Monitor System:
(1) Engage the 4 claws to install the outer mirror
OPERATION CHECK NOTICE: Make sure that the vehicle is in an area that allows the wireless control function to operate.
HINT:
The switches described in this text are the switches for transmitting signals. The switches are built into the door control transmitter module set sub-assembly.
All the