Toyota Camry (XV70): Diagnostic Trouble Code Chart
Toyota Camry Repair Manual XV70 (2018-2024) / Power Source, Network / Networking / Can Communication System / Diagnostic Trouble Code Chart
DIAGNOSTIC TROUBLE CODE CHART
Diagnostic Trouble Code Chart|
DTC No. | Detection Item |
Trouble Area | Link |
|---|---|---|---|
|
B1003 | ECU Malfunction |
Central gateway ECU (network gateway ECU) |
|
.gif)
READ NEXT:
ECU Malfunction (B1003)
DESCRIPTION
DTC No. Detection Item
DTC Detection Condition Trouble Area
Note B1003
ECU Malfunction A malfunction in the non-volatile storage of the central gateway ECU
Skid Control ECU Communication Stop Mode
DESCRIPTION
Detection Item Symptom
Trouble Area Skid Control ECU Communication Stop Mode
Any of the following conditions are met:
Communication stop for "Skid Control (
Clearance Warning ECU Communication Stop Mode
DESCRIPTION
Detection Item Symptom
Trouble Area Clearance Warning ECU Communication Stop Mode
Any of the following conditions are met:
Communication stop for "Clearance
SEE MORE:
Installation
INSTALLATION PROCEDURE 1. INSTALL TURN SIGNAL SWITCH
(a) Engage the claw as shown in the illustration.
Install in this Direction (b) Install the turn signal switch with the 2 screws.
2. INSTALL UPPER STEERING COLUMN COVER Click here
3. INSTALL LOWER STEERING COLUMN
Inspection
INSPECTION PROCEDURE 1. INSPECT CAMSHAFT TIMING GEAR BOLT
(a) Check the stroke of the plunger in the center of the camshaft timing gear bolt.
Standard Stroke: 2.2 mm (0.0866 in.) or more HINT: When pressing the plunger, there may be a stepped feeling. This is not a malfunction.
If the r
© 2023-2026 Copyright www.tocamry.com
