Toyota Camry (XV70): Fail-safe Chart
Toyota Camry Repair Manual XV70 (2018-2024) / Engine, Hybrid System / Cruise Control / Front Radar Sensor System / Fail-safe Chart
FAIL-SAFE CHART
FAIL-SAFE FUNCTION
(a) If a malfunction is detected in the front radar sensor system, a message is displayed on the multi-information display and systems related to the malfunction are stopped.
READ NEXT:
Data List / Active Test
DATA LIST / ACTIVE TEST DATA LIST NOTICE:
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a
Diagnostic Trouble Code Chart
DIAGNOSTIC TROUBLE CODE CHART Front Radar Sensor System
DTC No. Detection Item
Link C1A1100
Front Radar Sensor Optical Axis Misalignment Malfunction
C1A8C46 M
Vehicle Control History
VEHICLE CONTROL HISTORY
NOTICE:
Vehicle control history may be recorded due to the replacement or repair of related parts.
When checking the Vehicle Control History, make sure to record the
SEE MORE:
Internal Control Module Software Incompatibility Not Programmed (U030051,U030057)
DESCRIPTION The forward recognition camera receives vehicle information from the ECM via the CAN communication line.
When the forward recognition camera is unable to determine the vehicle information from the vehicle information sent from the ECM, the forward recognition camera outputs U030051.
Inspection
INSPECTION PROCEDURE 1. INSPECT REAR COMBINATION LIGHT LED (for Bulb Type Back-up Light)
*a Component without harness connected
(Rear Combination Light LED) (a) Apply battery voltage to the rear combination light LED and check that the lights illuminate.
OK:
Conditi
© 2023-2026 Copyright www.tocamry.com
