Toyota Camry (XV70): Installation
Toyota Camry Repair Manual XV70 (2018-2024) / Steering / Steering Column / Steering Pad Switch / Installation
INSTALLATION
PROCEDURE
1. INSTALL STEERING PAD SWITCH ASSEMBLY
(a) Engage the 4 claws and 3 pins to install the steering pad switch assembly.
(b) Install the 2 screws.
(c) Connect the steering pad switch connector to the spiral cable with sensor sub-assembly.
2. INSTALL HORN BUTTON ASSEMBLY
Click here
.gif)
READ NEXT:
Precaution
PRECAUTION HANDLING PRECAUTIONS FOR STEERING SYSTEM
(a) Care must be taken when replacing parts. Incorrect replacement may affect the performance of the steering system and result in a driving haza
Problem Symptoms Table
PROBLEM SYMPTOMS TABLE
HINT:
Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in or
SEE MORE:
High Mounted Stop Light Assembly
ComponentsCOMPONENTS ILLUSTRATION
*1 CENTER STOP LIGHT SET
- - RemovalREMOVAL PROCEDURE
1. REMOVE CENTER STOP LIGHT SET (a) Using a moulding remover, disengage the 2 claws as shown in the illustration.
Remove in this Direction
(b) Disconne
Inspection
INSPECTION PROCEDURE 1. INSPECT ENGINE SWITCH
(a) Check the resistance.
(1) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection Condition
Specified Condition
5 (SS1) - 6 (AGND) 1 (SS2) - 6 (AGND)
Not p
© 2023-2026 Copyright www.tocamry.com
