Toyota Camry (XV70): Multi-information display (4.2-inch display)
Toyota Camry Owner's Manual XV70 (2017-2024) / Instrument cluster / Multi-information display (4.2-inch display)
READ NEXT:
Summary of functions
The multi-information display presents the driver with a variety of driving-
related data, such as the current outside temperature. The multiinformation
display can also be used to change the displa
Drive information
■ Trip (after start)
Average fuel economy*
Displays the average fuel consumption
since engine start.
Average vehicle speed
Displays the average vehicle
speed since engine start.
Elap
Settings display
◆ Changing settings
Use the meter control switches on the steering wheel to change
settings.
1. Press or
to select
.
2. Operate the switches to select a desired item.
3. Change the setting
SEE MORE:
Removal
REMOVAL PROCEDURE 1. REMOVE LOWER STEERING COLUMN COVER SUB-ASSEMBLY
Click here 2. REMOVE UPPER STEERING COLUMN COVER
Click here 3. REMOVE TURN SIGNAL SWITCH
(a) Remove the 2 screws.
(b) Using a screwdriver with its tip wrapped with protective tape, disengage the
Terminals Of Ecu
TERMINALS OF ECU CHECK ECM (for A25A-FKS)
HINT: The standard voltage, resistance and waveform between each pair of the ECM terminals is shown in the table below. The appropriate conditions for checking each pair of the terminals is also indicated. The result of checks should be compared with the
© 2023-2026 Copyright www.tocamry.com
