Toyota Camry (XV70): On-vehicle Inspection
Toyota Camry Repair Manual XV70 (2018-2024) / Steering / Steering Column / Steering System / On-vehicle Inspection
ON-VEHICLE INSPECTION
PROCEDURE
1. INSPECT STEERING WHEEL FREE PLAY
(a) Start the engine and make sure that the vehicle is in a state in which the power steering can operate.
(b) Stop the vehicle and align the front wheels facing straight ahead.
(c) Gently turn the steering wheel right and left, and check for steering wheel free play.
Maximum Free Play:
30 mm (1.18 in.)
HINT:
If the free play exceeds the maximum, check the steering system.
Click here .gif)
READ NEXT:
Adjustment
ADJUSTMENT PROCEDURE 1. STEERING WHEEL OFF CENTER ADJUSTMENT PROCEDURE
(a) Inspect steering wheel off center. (1) Turn the steering wheel assembly to the center position.
(2) Apply masking t
Components
COMPONENTS ILLUSTRATION
*1 STEERING WHEEL ASSEMBLY
- -
Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping"
SEE MORE:
Disassembly
DISASSEMBLY PROCEDURE 1. REMOVE CYLINDER BOOT
(a) Using a screwdriver with its tip wrapped with protective tape, remove the rear disc brake piston set ring and cylinder boot from the rear disc brake cylinder.
NOTICE: Be careful not to damage the rear disc brake piston and rear disc brake cy
Registration
REGISTRATION CAUTION / NOTICE / HINT
NOTICE:
When the automatic transaxle assembly is replaced, the transaxle compensation code must be registered to the ECM (proceed to Procedure 1).
After the automatic transaxle assembly is installed, the Quick Response (QR) code label will be positioned w
© 2023-2025 Copyright www.tocamry.com
