Toyota Camry owners & service manuals

Toyota Camry (XV70): Operation Check

OPERATION CHECK

CHECK ELECTRICAL REMOTE CONTROL MIRROR FUNCTION

(a) Turn the ignition switch to ON.

(b) With L on the mirror select switch selected, check that the outer rear view mirror assembly LH surface moves up, down, left and right normally.

(c) With R on the mirror select switch selected, check that the outer rear view mirror assembly RH surface moves up, down, left and right normally.

CHECK MIRROR HEATER FUNCTION

(a) Turn the ignition switch to ON.

(b) Check that pressing the mirror heater switch (rear window defogger switch) illuminates the indicator and warms the mirror surfaces.

(c) Check that after approximately 15 minutes, the indicator light turns off and the mirror heaters deactivate.

HINT:

There is a timer extension function which can operate the mirror heaters for up to an additional 45 minutes.

    READ NEXT:

     Problem Symptoms Table

    PROBLEM SYMPTOMS TABLE NOTICE: If the battery voltage is low, the mirror heater function may not operate. In this case, check the Data List item "Battery Control Count (Body ECU)". Click here

     Terminals Of Ecu

    TERMINALS OF ECU CHECK AIR CONDITIONING AMPLIFIER ASSEMBLY Click here CHECK AIR CONDITIONING CONTROL ASSEMBLY Click here

     Diagnosis System

    DIAGNOSIS SYSTEM CHECK DLC3 (a) Check the DLC3. Click here INSPECT BATTERY VOLTAGE (a) Measure the battery voltage. Standard Voltage: 11 to 14 V If the voltage is below 11 V, recharge or r

    SEE MORE:

     Rear Axle Hub Bolt(w/ Electric Parking Brake System)

    ComponentsCOMPONENTS ILLUSTRATION *1 NO. 2 PARKING BRAKE WIRE ASSEMBLY *2 REAR AXLE HUB BOLT *3 REAR DISC *4 REAR DISC BRAKE CALIPER ASSEMBLY *5 REAR FLEXIBLE HOSE - - Tightening torque for "Major areas involving basic vehicle pe

     Starter Relay Circuit Short to Battery (P061512)

    MONITOR DESCRIPTION While the engine is being cranked, positive battery voltage is applied to terminal STA of the ECM. If the ECM detects the starter control (STA) signal while the vehicle is being driven, it determines that there is a malfunction in the STA circuit. The ECM then illuminates the MIL

    © 2023-2026 Copyright www.tocamry.com