Toyota Camry (XV70): Reassembly

REASSEMBLY

PROCEDURE

1. INSTALL NO. 1 COMBINATION METER MIRROR PLATE

(a) Connect the light sensor assembly with the screw.

*1 Light Sensor Assembly

(b) Engage the 2 claws as shown in the illustration.

Install in this Direction

(c) Install the No. 1 combination meter mirror plate with the 8 screws.

2. INSTALL COMBINATION SPEED METER CUSHION

(a) Clean the meter mirror sub-assembly surface.

(1) Remove any remaining double-sided tape from the meter mirror sub-assembly.

(2) Wipe off any tape adhesive residue with cleaner.

(b) Remove the release paper from a new combination speed meter cushion.

HINT:

After removing the release paper, keep the exposed adhesive free from foreign matter.

(c) Install the combination speed meter cushion.

Double-sided Tape

3. INSTALL NO. 1 COMBINATION SPEED METER CUSHION

(a) Clean the meter mirror sub-assembly surface.

(1) Remove any remaining double-sided tape from the meter mirror sub-assembly.

(2) Wipe off any tape adhesive residue with cleaner.

(b) Remove the release paper from a new No. 1 combination speed meter cushion.

HINT:

After removing the release paper, keep the exposed adhesive free from foreign matter.

(c) Install the No. 1 combination speed meter cushion.

Double-sided Tape

4. INSTALL METER MIRROR WIRE

(a) Engage the 2 clamps.

(b) Connect the connector to install the meter mirror wire.

READ NEXT: