Toyota Camry (XV70): Lost Communication With ECM/PCM "A" Missing Message (U010087,U012587,U012987,U014087)
DESCRIPTION
These DTCs are stored if a CAN communication malfunction occurs between the forward recognition camera and other ECUs.
|
DTC No. | Detection Item |
DTC Detection Condition |
Trouble Area | DTC Output from |
|---|---|---|---|---|
|
U010087 | Lost Communication With ECM/PCM "A" Missing Message |
The forward recognition camera does not receive data from the ECM for approximately 5 seconds or more when the vehicle speed is 1 km/h or more. |
| Front Recognition Camera (Front Lighting Control) |
|
U012587 | Lost Communication With Multi-axis Acceleration Sensor Module Missing Message |
The forward recognition camera does not receive data from the airbag sensor assembly for approximately 5 seconds or more when the vehicle speed is 1 km/h or more. |
| Front Recognition Camera (Front Lighting Control) |
|
U012987 | Lost Communication with Brake System Control Module Missing Message |
The forward recognition camera does not receive data from the skid control ECU (brake actuator assembly) for approximately 5 seconds or more. |
| Front Recognition Camera (Front Lighting Control) |
|
U014087 | Lost Communication with Body Control Module Missing Message |
The forward recognition camera does not receive data from the main body ECU (multiplex network body ECU) for approximately 5 seconds or more. |
| Front Recognition Camera (Front Lighting Control) |
PROCEDURE
|
1. | CLEAR DTC |
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Front Recognition Camera (Front Lighting Control) / Trouble Codes.
(e) Clear the DTCs.
Body Electrical > Front Recognition Camera (Front Lighting Control) > Clear DTCs
|
.gif)
|
2. | CHECK FOR DTC |
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Wait 10 seconds or more.
(d) Turn the Techstream on.
(e) Enter the following menus: Body Electrical / Front Recognition Camera (Front Lighting Control) / Trouble Codes.
(f) Check for DTCs.
Body Electrical > Front Recognition Camera (Front Lighting Control) > Trouble CodesOK:
DTCs are not output.
| OK | .gif) |
USE SIMULATION METHOD TO CHECK |
.gif)
| NG | |
GO TO CAN COMMUNICATION SYSTEM |
READ NEXT:
Lost Communication with Cruise Control Front Distance Range Sensor Signal Sensor or Center Missing Message (U023587)
DESCRIPTION The forward recognition camera and millimeter wave radar sensor assembly communicate via CAN communication. If there is an error in the communication with the millimeter wave radar sensor
Turn Signal Switch Circuit
DESCRIPTION The steering sensor receives the turn signal switch information and controls the turn signal lights. WIRING DIAGRAM
PROCEDURE
1. READ VALUE USING TECHSTREAM
(a) Conn
Automatic High Beam Switch Indicator does not Come ON
DESCRIPTION When the automatic high beam system is on, the main body ECU (multiplex network body ECU) illuminates the auto high beam switch indicator. WIRING DIAGRAM
CAUTION / NOTICE / HINT
NOT
SEE MORE:
Removal
REMOVAL CAUTION / NOTICE / HINT
NOTICE:
Immediately after installing the front disc brake pads, the braking performance may be reduced. Always perform a road test in a safe place while paying attention to the surroundings.
After replacing the front disc brake pads, always perform a road t
Components
COMPONENTS ILLUSTRATION
*1 STEERING WHEEL SWITCH HOUSING
*2 TURN SIGNAL SWITCH
*3 WINDSHIELD WIPER SWITCH ASSEMBLY
- -
