INSPECTION PROCEDURE 1. INSPECT FUEL PUMP
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection Specified Condition
U - V 0.05 to 3.0 Ω
V - W 0.05 to 3.0 Ω
U - W 0.05 to 3.0 Ω
DESCRIPTION The ECM uses the engine coolant temperature sensor, installed to the water outlet, to monitor the operation of the thermostat.
DTC No. Detection Item
DTC Detection Condition Trouble Area
MIL Memory
Note P012800
Coolant Thermostat (Coolant Temperature