Toyota Camry (XV70): Using the air conditioning system and defogger
Toyota Camry Owner's Manual XV70 (2017-2024) / Interior features / Using the air conditioning
system and defogger
- Manual air conditioning system
- Air outlets - Manual air conditioning system
- Automatic air conditioning system (without "SYNC" button)
- Air outlets - Automatic air conditioning system (without "SYNC" button)
- Automatic air conditioning system (with "SYNC" button)
- Air outlets - Automatic air conditioning system (with "SYNC" button)
- Heated steering wheel/seat heaters/seat ventilators
READ NEXT:
Manual air conditioning
system
Air conditioning controls
■ Adjusting the temperature setting
To adjust the temperature setting, turn
clockwise to
increase the temperature and counterclockwise to decrease the
temperature.
Air outlets - Manual air conditioning system
■ Location of air outlets
The air outlets and air volume
change according to the
selected airflow mode.
■ Adjusting the position of and opening and closing the air outlets
Direct air flo
Automatic air conditioning
system (without "SYNC"
button)
Air outlets and fan speed are automatically adjusted according
to the temperature setting.
Air conditioning controls
■ Adjusting the temperature setting
To adjust the temperature setting, turn
SEE MORE:
On-vehicle Inspection
ON-VEHICLE INSPECTION PROCEDURE
1. CONNECT TECHSTREAM (a) Connect the Techstream to the DLC3 with the ignition switch off.
(b) Start the engine and run it at idle. (c) Turn the Techstream on.
(d) Enter the following menus: Chassis / Brake / Active Test. HINT:
Refer to the Techstream operator
Wheel Speed Sensor Signal Compare Failure (C124E62)
DESCRIPTION The skid control ECU (brake actuator assembly) measures the speed of each wheel by receiving signals from each speed sensor.
These signals are used for recognizing that all four wheels are operating properly.
Therefore, signals from all wheels must be equal.
DTC No. Detection
© 2023-2026 Copyright www.tocamry.com
