Toyota Camry owners & service manuals

Toyota Camry (XV70): Manual air conditioning system

Air conditioning controls

Using the air conditioning system and defogger

■ Adjusting the temperature setting

To adjust the temperature setting, turn clockwise to increase the temperature and counterclockwise to decrease the temperature.

If  is not pressed, the system will blow ambient temperature air or heated air.

■ Fan speed setting

To adjust the fan speed, turn clockwise to increase the fan speed and counterclockwise to decrease the fan speed.

Turning the dial to "OFF" turns off the fan.

■ Change the airflow mode

To change the airflow mode, press or .

  1. Air flows to the upper body.
  2. Air flows to the upper body and feet.
  3. Air flows to the feet.
  4. Air flows to the feet and the windshield defogger operates.

Using the air conditioning system and defogger

Other functions

■ Switching between outside air and recirculated air modes

Press .

The mode switches between outside air mode (indicator off) and recirculated air mode (indicator on) each time is pressed.

■ Defogging the windshield

Defoggers are used to defog the windshield and front side windows.

1. Press .

If the recirculated air mode is used, it will automatically switch to the outside air mode.

2. Perform the following operations accordingly:

  • To adjust the fan speed, turn .
  • To adjust the temperature setting, turn .
  • If the dehumidification function is not operating, press to operate the dehumidification function.

To defog the windshield and the side windows early, turn the air flow and temperature up.

■ Defogging the rear window and outside rear view mirrors

Vehicles without outside rear view mirror defoggers

A defogger is used to defog the rear window.

Press .

The defogger will automatically turn off after a period of time.

Vehicles with outside rear view mirror defoggers

Defoggers are used to defog the rear window, and to remove raindrops, dew and frost from the outside rear view mirrors.

Press .

The defoggers will automatically turn off after a period of time.

    READ NEXT:

     Air outlets - Manual air conditioning system

    ■ Location of air outlets The air outlets and air volume change according to the selected airflow mode. ■ Adjusting the position of and opening and closing the air outlets Direct air flo

     Automatic air conditioning system (without "SYNC" button)

    Air outlets and fan speed are automatically adjusted according to the temperature setting. Air conditioning controls ■ Adjusting the temperature setting To adjust the temperature setting, turn

     Air outlets - Automatic air conditioning system (without "SYNC" button)

    ■ Location of air outlets The air outlets and air volume change according to the selected airflow mode. ■ Adjusting the position of and opening and closing the air outlets Direct air flo

    SEE MORE:

     Replacement

    REPLACEMENT CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during automatic transaxle fluid replacement are shown below. Necessary Procedures After Parts Removed/I

     Freeze Frame Data

    FREEZE FRAME DATA FREEZE FRAME DATA (a) Whenever DTCs are detected, the blind spot monitor sensor stores the current vehicle (sensor) state as freeze frame data. CHECK FREEZE FRAME DATA (a) Connect the Techstream to the DLC3. (b) Turn the engine switch on (IG). (c) Turn the blind spot monitor sy

    © 2023-2024 Copyright www.tocamry.com