Toyota Camry (XV70): Interior features
Toyota Camry Owner's Manual XV70 (2017-2024) / Interior features
- Using the air conditioning system and defogger
- Manual air conditioning system
- Air outlets - Manual air conditioning system
- Automatic air conditioning system (without "SYNC" button)
- Air outlets - Automatic air conditioning system (without "SYNC" button)
- Automatic air conditioning system (with "SYNC" button)
- Air outlets - Automatic air conditioning system (with "SYNC" button)
- Heated steering wheel/seat heaters/seat ventilators
- Using the interior lights
- Using the storage features
- Other interior features
READ NEXT:
Manual air conditioning
system
Air conditioning controls
■ Adjusting the temperature setting
To adjust the temperature setting, turn
clockwise to
increase the temperature and counterclockwise to decrease the
temperature.
Air outlets - Manual air conditioning system
■ Location of air outlets
The air outlets and air volume
change according to the
selected airflow mode.
■ Adjusting the position of and opening and closing the air outlets
Direct air flo
SEE MORE:
Slip Indicator Light Remains ON
DESCRIPTION This procedure is for troubleshooting when the slip indicator light remains on but no DTCs are output.
The skid control ECU (brake actuator assembly) controls the slip indicator light in the combination meter assembly via CAN communication.
The slip indicator light blinks during VSC
On-vehicle Inspection
ON-VEHICLE INSPECTION PROCEDURE
1. CONNECT TECHSTREAM (a) Connect the Techstream to the DLC3 with the ignition switch off.
(b) Start the engine and run it at idle. (c) Turn the Techstream on.
(d) Enter the following menus: Chassis / Brake / Active Test. HINT:
Refer to the Techstream operator
© 2023-2026 Copyright www.tocamry.com
