Toyota Camry owners & service manuals

Toyota Camry (XV70): Washer fluid

Add washer fluid in the following situations:

  • A washer does not work.
  • "Windshield Washer Fluid Low" is displayed on the multi-information display.

Do-it-yourself maintenance

WARNING

■When adding washer fluid

Do not add washer fluid when the engine is hot or running as washer fluid contains alcohol and may catch fire if spilled on the engine, etc.

NOTICE

■Do not use any fluid other than washer fluid

Do not use soapy water or engine antifreeze instead of washer fluid.

Doing so may cause streaking on the vehicle's painted surfaces, as well as damaging the pump leading to problems of the washer fluid not spraying.

■Diluting washer fluid

Dilute washer fluid with water as necessary.

Refer to the freezing temperatures listed on the label of the washer fluid bottle.

    READ NEXT:

     Tires

    Replace or rotate tires in accordance with maintenance schedules and treadwear. Checking tires Check if the treadwear indicators are showing on the tires. Also check the tires for uneven wear, suc

     Tire pressure warning system

    Your vehicle is equipped with a tire pressure warning system that uses tire pressure warning valve and transmitters to detect low tire inflation pressure before serious problems arise. Vehicles wit

     Tire inflation pressure

    Tire inflation pressure The recommended cold tire inflation pressure and tire size are displayed on the tire and loading information label. Inspection and adjustment procedure Tire valve Ti

    SEE MORE:

     Camera ECU Malfunction (C1610)

    DESCRIPTION This DTC is stored when a malfunction occurs in the parking assist monitor system*1 or panoramic view monitor system*2. DTC No. Detection Item DTC Detection Condition Trouble Area C1610 Camera ECU Malfunction Malfunction occurs in the parking assist mo

     Drive Mode Select Switch Circuit

    DESCRIPTION The electronic throttle and the EPS character change by the operation of the drive mode switch (electric parking brake switch assembly). WIRING DIAGRAM PROCEDURE 1. CHECK THE PROBLEM SYMPTOMS (a) Check each symptom by checking the suspected areas in the table below

    © 2023-2026 Copyright www.tocamry.com