Toyota Camry (XV70): Customize Parameters
CUSTOMIZE PARAMETERS
CUSTOMIZE WIRELESS DOOR LOCK CONTROL SYSTEM
HINT:
The following items can be customized.
NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
(a) Customizing with the Techstream
(1) Connect the Techstream to the DLC3.
(2) Turn the ignition switch to ON.
(3) Turn the Techstream on.
(4) Enter the following menus: Customize Setting / Wireless Door Lock.
(5) Select the setting by referring to the table below.
Wireless Door Lock|
Tester Display | Description |
Default | Setting |
ECU |
|---|---|---|---|---|
| Wireless Control |
Function that turns the wireless door lock control system on or off |
ON | 0:OFF,1:ON |
Main body ECU (Multiplex network body ECU) |
|
Hazard Answer Back | Function that flashes the hazard warning lights once when the doors are locked by wireless operation and twice when the doors are unlocked by wireless operation |
ON | 0:OFF,1:ON |
Main body ECU (Multiplex network body ECU) |
|
Open Door Warning | Function that sounds a buzzer when the lock switch is pressed when any of the doors are ajar |
ON | 0:OFF,1:ON |
Main body ECU (Multiplex network body ECU) |
|
Unlock 2 Operation | Function that unlocks the driver door when the unlock switch on the door control transmitter module set sub-assembly is pressed once, and unlocks all of the doors when pressed twice. If this setting is OFF, pressing the unlock switch once unlocks all of the doors. |
ON | 0:OFF,1:ON |
Main body ECU (Multiplex network body ECU) |
|
Panic Function | Function that operates the theft deterrent system by pressing the panic switch on the door control transmitter module set sub-assembly for 0.8 seconds |
ON | 0:OFF,1:ON |
Main body ECU (Multiplex network body ECU) |
|
Trunk Lid Operation | Function to change the operation method of opening of luggage compartment door using the door control transmitter module set sub-assembly. 1tim ON: Push the luggage door open switch once 2tim ON: Push the luggage door open switch twice Long1: Push the luggage door open switch for 0.8 seconds Long2: Push the luggage door open switch for 1.6 seconds Prohibit: Wireless luggage compartment door open function is off |
Long1 | 000:1tim ON,001:2tim ON,010:Long1,011:Long2,111:Prohibit |
Main body ECU (Multiplex network body ECU) |
|
Auto Lock Time | Function that regulates the interval between unlocking and automatic relocking of the doors |
60 s | 00:30 s,01:60 s,10:120 s |
Main body ECU (Multiplex network body ECU) |
|
Wireless Auto Lock | Function that turns the wireless auto lock function on or off |
ON | 0:OFF,1:ON |
Main body ECU (Multiplex network body ECU) |
|
Wireless Buzzer Resp | Function that enables/disables the wireless door lock buzzer response |
ON | 0:OFF,1:ON |
Main body ECU (Multiplex network body ECU) |
|
P/W Wireless Ope Buzz | Function that enables/disables the wireless power window buzzer response |
ON | 0:OFF,1:ON |
Main body ECU (Multiplex network body ECU) |
|
Wireless Buzzer Vol | Function that adjusts the wireless door lock buzzer volume |
Level5 | 0000:Level7,0001:Level6,0010:Level5,0011:Level4,0100:Level3,0101:Level2,0110:Level1,0111:Level0 |
Main body ECU (Multiplex network body ECU) |
|
Wireless Lock Function with Doors Open |
Function that locks the doors automatically if the lock switch on the door control transmitter module set sub-assembly is pressed with any door open and then all of the doors are closed |
ON | 0:OFF,1:ON |
Main body ECU (Multiplex network body ECU) |
(b) Customizing with the multi-display
(1) Turn the ignition switch to ON.
(2) Enter the following menus: Setup / Vehicle / Vehicle Customization / Door Lock Settings.
(3) Select the setting by referring to the table below.
|
Display | Description |
Default | Setting |
Relevant ECU |
|---|---|---|---|---|
| Remote 2-Press Unlock |
Function that unlocks the driver door when the unlock switch on the door control transmitter module set sub-assembly is pressed once, and unlocks all of the doors when pressed twice. If this setting is OFF, pressing the unlock switch once unlocks all of the doors. |
On | On or Off |
Main body ECU (Multiplex network body ECU) |
|
Wireless Lock When Door Opened |
Function that locks the doors automatically if the lock switch on the door control transmitter module set sub-assembly is pressed with any door open and then all of the doors are closed |
On | On or Off |
Main body ECU (Multiplex network body ECU) |
|
Auto Relock Timer | Function that regulates the interval between unlocking and automatic relocking of the doors |
60 sec. | 30 sec, 60 sec or 120 sec |
Main body ECU (Multiplex network body ECU) |
|
Lock/Unlock Feedback-Lights |
Function that flashes the hazard warning lights once when the doors are locked by wireless operation and twice when the doors are unlocked by wireless operation |
On | On or Off |
Main body ECU (Multiplex network body ECU) |
|
Lock/Unlock Feedback-Tone |
Function that adjusts the wireless door lock buzzer volume |
5 | Off, 1, 2, 3, 4, 5, 6 or 7 |
Main body ECU (Multiplex network body ECU) |
READ NEXT:
SEE MORE:
Removal
REMOVAL CAUTION / NOTICE / HINT
NOTICE:
Immediately after installing the brake pads, the braking performance may be reduced. Always perform a road test in a safe place while paying attention to the surroundings.
After replacing the rear disc brake pads, the brake pedal may feel soft due t
Left Rear Wheel ABS Hold Solenoid Control Circuit Short to Battery (C12D112,...,C12DC49)
DESCRIPTION The ABS solenoid relay and solenoid valves are built into the brake actuator assembly.
The rear solenoid valve LH controls the brake fluid pressure of the rear wheel cylinder LH of the vehicle.
When this DTC is stored, the fail-safe function operates and the ABS solenoid relay is tur
