Toyota Camry (XV70): Diagnosis System
DIAGNOSIS SYSTEM
DESCRIPTION
Air conditioning system data and Diagnostic Trouble Codes (DTCs) can be read through the Data Link Connector 3 (DLC3) of the vehicle. When the system seems to be malfunctioning, use the Techstream to check for malfunctions and perform troubleshooting.
CHECK DLC3
Check the DLC3.
Click here
.gif)
READ NEXT:
Dtc Check / Clear
DTC CHECK / CLEAR DTC CHECK USING TECHSTREAM (a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON. (c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical /
Data List / Active Test
DATA LIST / ACTIVE TEST DATA LIST NOTICE:
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a p
Diagnostic Trouble Code Chart
DIAGNOSTIC TROUBLE CODE CHART Air Conditioning System (for Automatic Air Conditioning System)
DTC No. Detection Item
DTC Detection Condition Link
B1411 Room Temperature Sensor Ci
SEE MORE:
Removal
REMOVAL CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during clearance warning ECU assembly removal/installation are shown below. Necessary Procedure After Parts
Installation
INSTALLATION PROCEDURE 1. INSTALL REAR SPOILER RETAINER (except TRD)
HINT: When installing a new rear spoiler retainer, heat the luggage compartment door panel and rear spoiler retainer using a heat light. Heating Temperature
Item Temperature
Luggage Compartment Door Panel
© 2023-2026 Copyright www.tocamry.com
