Toyota Camry (XV70): Dtc Check / Clear
Toyota Camry Repair Manual XV70 (2018-2024) / Vehicle Exterior / Wiper / Washer / Wiper And Washer System / Dtc Check / Clear
DTC CHECK / CLEAR
CHECK FOR DTC
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / (desired system) / Trouble Codes.
Body Electrical > Wiper > Trouble Codes Body Electrical > Main Body > Trouble Codes(e) Check for DTCs.
CLEAR DTC
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / (desired system) / Trouble Codes.
Body Electrical > Wiper > Clear DTCs Body Electrical > Main Body > Clear DTCs(e) Clear the DTCs.
READ NEXT:
Freeze Frame Data
FREEZE FRAME DATA FREEZE FRAME DATA (a) Whenever a DTC is detected, the windshield wiper motor motor assembly stores the current vehicle state as Freeze Frame Data.
CHECK FREEZE FRAME DATA (a) Conn
Fail-safe Chart
FAIL-SAFE CHART PROTECTION FUNCTION (a) The windshield wiper motor assembly operates the following protection functions if it detects an abnormal condition, in order to protect the wiper and washer sy
Data List / Active Test
DATA LIST / ACTIVE TEST DATA LIST NOTICE:
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a
SEE MORE:
Components
COMPONENTS ILLUSTRATION
*1 COOL AIR INTAKE DUCT SEAL
*2 COWL SIDE TRIM SUB-ASSEMBLY LH
*3 FRONT DOOR SCUFF PLATE LH
*4 FRONT FENDER LINER LH
*5 FRONT WHEEL OPENING EXTENSION PAD LH
*6 HOOD LOCK ASSEMBLY
*7 HOOD LOCK CONTROL C
Reassembly
REASSEMBLY CAUTION / NOTICE / HINT
HINT:
Use the same procedure for the LH side and RH side.
The following procedure is for the LH side.
PROCEDURE 1. INSTALL PARKING BRAKE SHOE HOLD DOWN SPRING PIN (for Rear Side)
(a) Install the parking brake shoe hold down spring pin to the backing
© 2023-2026 Copyright www.tocamry.com
