Toyota Camry (XV70): Key-off Operation Function Operates even if Operating Conditions are not Satisfied
DESCRIPTION
According to the panoramic moon roof switch (roof console box sub-assembly) operation, the sliding roof ECU (sliding roof drive gear assembly) or roof sunshade ECU (sliding roof drive gear assembly) operates its built-in motor. Using the panoramic moon roof switch (roof console box sub-assembly), if the sliding roof glass or roof sunshade can be operated normally when 45 seconds or more have elapsed since the engine switch was turned off, the key-off operation function may be abnormal.
CAUTION / NOTICE / HINT
NOTICE:
- If the sliding roof ECU (sliding roof drive gear assembly) or roof sunshade ECU (sliding roof drive gear assembly) is removed and reinstalled or replaced, the sliding roof ECU (sliding roof drive gear assembly) or roof sunshade ECU (sliding roof drive gear assembly) must be initialized.
Click here
.gif)
- The panoramic moon roof system uses the CAN and LIN communication systems. First, confirm that there are no malfunctions in the CAN and LIN communication systems. Refer to How to Proceed with Troubleshooting.
Click here
- Before replacing the main body ECU (multiplex network body ECU), refer to Registration.
Click here
PROCEDURE
|
1. | CHECK POWER WINDOW CONTROL SYSTEM |
(a) Check if the key-off operation function of the power window control system operates normally.
Click here
OK:
The key-off operation function of the power window control system operates normally.
| NG | .gif) |
REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)
|
|
.gif)
|
2. | CHECK KEY-OFF OPERATION FUNCTION |
(a) Check the key-off operation function.
Click here
|
Result | Proceed to |
|---|---|
|
Sliding roof can still be operated even after approximately 45 seconds have elapsed after engine switch is turned off |
A |
| Roof sunshade can still be operated even after approximately 45 seconds have elapsed after engine switch is turned off |
B |
| A | |
REPLACE SLIDING ROOF ECU (SLIDING ROOF DRIVE GEAR ASSEMBLY)
|
| B | |
REPLACE ROOF SUNSHADE ECU (SLIDING ROOF DRIVE GEAR ASSEMBLY)
|
READ NEXT:
Panoramic Moon Roof System does not Operate
DESCRIPTION The sliding roof ECU (sliding roof drive gear assembly) and roof sunshade ECU (sliding roof drive gear assembly) receive each other's position information from the main body ECU (multiplex
Components
COMPONENTS ILLUSTRATION
*1 SLIDING ROOF GLASS SUB-ASSEMBLY
*2 SLIDING ROOF SIDE GARNISH LH
*3 SLIDING ROOF SIDE GARNISH RH
*4 SLIDING ROOF WEATHERSTRIP
SEE MORE:
Terminals Of Ecm
TERMINALS OF ECM ECM
HINT: The standard voltage and resistance of each ECM terminal is shown in the table below.
In the table, first follow the information under "Condition". Look under "Terminal No. (Symbol)" for the terminals to be inspected. The standard voltage or resistance between the ter
Terminals Of Ecm
TERMINALS OF ECM
HINT: The standard normal voltage and resistance between each pair of ECM terminals is shown in the table below. The appropriate conditions for checking each pair of terminals are also indicated. The result of checks should be compared with the standard normal voltage and resista
