Toyota Camry (XV70): Lost Communication With ECM/PCM "A" (U0100-U0142,U0151,U0155)
DESCRIPTION
|
DTC No. | Detection Item |
DTC Detection Condition | Trouble Area |
Memory |
|---|---|---|---|---|
| U0100 |
Lost Communication With ECM/PCM "A" |
No communication with ECM |
| Memorized |
|
U0131 | Lost Communication With Power Steering Control Module |
No communication with power steering ECU (rack and pinion power steering gear assembly) |
| Memorized |
|
U0142 | Lost Communication With Body Control Module "B" |
No communication with main body ECU (multiplex network body ECU) |
| Memorized |
|
U0151 | Lost Communication With Restraints Control Module |
No communication with airbag sensor assembly |
| Memorized |
|
U0155 | Lost Communication With Instrument Panel Cluster (IPC) Control Module |
No communication with combination meter assembly |
| Memorized |
PROCEDURE
| 1. |
GO TO CAN COMMUNICATION SYSTEM |
HINT:
Refer to CAN Communication System.
Click here
.gif)
| NEXT | .gif) | END |
READ NEXT:
Blower Motor Circuit
DESCRIPTION The blower motor with fan sub-assembly is operated by signals from the air conditioning amplifier assembly. Blower motor speed signals are transmitted in accordance with changes in the dut
Air Conditioning Compressor Magnetic Clutch Circuit
DESCRIPTION When the engine is running, If refrigerant pressure does not decrease when the A/C switch is turned off, the following suspected areas may be the cause.
Symptom Factor
Co
Ambient Temperature Display System
DESCRIPTION The thermistor assembly is installed in front of the cooler condenser assembly to detect the ambient temperature, which is used to control the automatic air conditioning system. The thermi
SEE MORE:
Data List / Active Test
DATA LIST / ACTIVE TEST READ DATA LIST HINT:
Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may
Inspection
INSPECTION PROCEDURE 1. INSPECT OIL PUMP RELIEF VALVE
(a) Coat the oil pump relief valve with engine oil and check that it falls smoothly into the valve hole by its own weight.
HINT: If the oil pump relief valve does not fall smoothly, replace the timing chain cover assembly.
