Toyota Camry (XV70): Manual(sos)switch
Components
COMPONENTS
ILLUSTRATION
|
*A | for Normal Roof |
*B | except Normal Roof |
|
*1 | MANUAL (SOS) SWITCH (ROOF CONSOLE BOX ASSEMBLY) |
- | - |
Removal
REMOVAL
PROCEDURE
1. REMOVE MANUAL (SOS) SWITCH (ROOF CONSOLE BOX ASSEMBLY)
Click here
Installation
INSTALLATION
PROCEDURE
1. INSTALL MANUAL (SOS) SWITCH (ROOF CONSOLE BOX ASSEMBLY)
Click here
READ NEXT:
PRECAUTION PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE: When disconnecting the cable from the negative (-) battery terminal, initialize the following systems after the t
PARTS LOCATION ILLUSTRATION
*1 FRONT NO. 2 SPEAKER ASSEMBLY (RH)
*2 DCM (TELEMATICS TRANSCEIVER) - BUB (BACK-UP BATTERY)
*3 AIRBAG SENSOR ASSEMBLY
*4 INSTRUMENT P
SEE MORE:
CAUTION / NOTICE / HINT
NOTICE:
Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Navigation System.
Click here
When replacing the radio and display receiver
INSTALLATION PROCEDURE 1. INSTALL STUD BOLT
HINT: If a stud bolt is deformed or the threads are damaged, replace it.
(a) Using an E6 "TORX" socket wrench, install the 2 stud bolts to the intake manifold.
Torque: 10 N·m {102 kgf·cm, 7 ft·lbf}
2. INSTALL NO. 1 INTAKE M