Toyota Camry owners & service manuals

Toyota Camry (XV70): Multi-axis Acceleration Sensor Module "A" Circuit Voltage Out of Range (C05201C)

Toyota Camry Repair Manual XV70 (2018-2024) / Brake / Brake Control / Dynamic Control Systems / Vehicle Stability Control System (w/ Electric Parking Brake System) / Multi-axis Acceleration Sensor Module "A" Circuit Voltage Out of Range (C05201C)

DESCRIPTION

The airbag sensor assembly has a built-in yaw rate and acceleration sensor and detects the vehicle condition.

When the skid control ECU (brake actuator assembly) detects an abnormal acceleration sensor (airbag sensor assembly) signal, or the control value calculated using the acceleration sensor (airbag sensor assembly), yaw rate sensor (airbag sensor assembly), steering angle sensor and speed sensor are compared and judged to be abnormal, this DTC is stored.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

C05201C

Multi-axis Acceleration Sensor Module "A" Circuit Voltage Out of Range
  • When the vehicle is being driven and the stop light switch assembly is OFF, the value (longitudinal) of the acceleration sensor (airbag sensor assembly) is less than -4.0 m/s2 or more than 4.0 m/s2 for 20 seconds or more.
  • When the vehicle is being driven, the difference in the acceleration value (longitudinal) calculated using the speed sensors and the acceleration value of the acceleration sensor (airbag sensor assembly) is less than -3.5 m/s2 or more than 3.5 m/s2 for 4 seconds or more.
  • When the vehicle is being driven in a straight line, the calculated lateral acceleration value based on the speed sensors, steering sensor angle and yaw rate sensor (airbag sensor assembly) differs from the value (lateral) of the acceleration sensor (airbag sensor assembly).

Acceleration sensor (airbag sensor assembly)
DTC Detection Conditions: C05201C
 

Vehicle Condition

Pattern 1

Pattern 2

Pattern 3

Pattern 4

Pattern 5

Diagnosis Condition

The vehicle is being driven and the stop light switch assembly is OFF.

○

○

-

-

-

The vehicle is being driven.

-

-

○

○

-

When the vehicle is being driven in a straight line.

-

-

-

-

○

Malfunction Status

The value (longitudinal) of the acceleration sensor (airbag sensor assembly) is less than -4.0 m/s2.

○

-

-

-

-

The value (longitudinal) of the acceleration sensor (airbag sensor assembly) is more than 4.0 m/s2.

-

○

-

-

-

The difference in the acceleration value (longitudinal) calculated using the speed sensors and the acceleration value of the acceleration sensor (airbag sensor assembly) is less than -3.5 m/s2.

-

-

○

-

-

The difference in the acceleration value (longitudinal) calculated using the speed sensors and the acceleration value of the acceleration sensor (airbag sensor assembly) is more than 3.5 m/s2.

-

-

-

○

-

The calculated lateral acceleration value based on the speed sensors, steering sensor angle and yaw rate sensor (airbag sensor assembly) differs from the value (lateral) of the acceleration sensor (airbag sensor assembly).

-

-

-

-

○

Detection Time

20 seconds or more.

20 seconds or more.

4 seconds or more.

4 seconds or more.

-

Number of Trips

1 trip

1 trip

1 trip

1 trip

1 trip

HINT:

DTC will be output when conditions for either of the patterns in the table above are met.

CAUTION / NOTICE / HINT

NOTICE:

After replacing or reinstalling the yaw rate and acceleration sensor (airbag sensor assembly), perform acceleration sensor zero point calibration and system information memorization after performing "Reset Memory".

Click here

PROCEDURE

1.

REPLACE AIRBAG SENSOR ASSEMBLY

(a) Replace the yaw rate and acceleration sensor (airbag sensor assembly).

Click here

NEXT

END

    READ NEXT:

     Multi-axis Acceleration Sensor Module "A" Circuit Voltage Out of Range (C05201C)

    DESCRIPTION The airbag sensor assembly has a built-in yaw rate and acceleration sensor and detects the vehicle condition. When the skid control ECU (brake actuator assembly) detects an abnormal acce

     Multi-axis Acceleration Sensor Module "A" Signal Stuck In Range (C05202A)

    DESCRIPTION The airbag sensor assembly has a built-in yaw rate and acceleration sensor and detects the vehicle condition. The skid control ECU (brake actuator assembly) memorizes the range of the ac

     Multi-axis Acceleration Sensor Module "A" Component Internal Failure (C052096)

    DESCRIPTION The airbag sensor assembly has a built-in yaw rate and acceleration sensor and detects the vehicle condition. The skid control ECU (brake actuator assembly) receives signals from the yaw

    SEE MORE:

     Screen Flicker or Color Distortion

    PROCEDURE 1. CHECK DISPLAY SETTING (a) Reset display settings (contrast, brightness) and check that the screen appears normal. OK: The display returns to normal. OK END NG PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

     Ultrasonic Sensor (Front Right Center) Component Internal Failure (C1AE396)

    DESCRIPTION The front center ultrasonic sensor RH is installed on the front bumper. The clearance warning ECU assembly detects obstacles based on signals it receives from the front center ultrasonic sensor RH. If an open circuit or other malfunction occurs in the front center ultrasonic sensor RH, t

    © 2023-2024 Copyright www.tocamry.com