Toyota Camry owners & service manuals

Toyota Camry (XV70): Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device

Toyota Camry Repair Manual XV70 (2018-2024) / Audio, Visual, Telematics / Navigation / Multi Info Display / Navigation System / Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device

PROCEDURE

1.

CHECK USING ANOTHER "Bluetooth" AUDIO COMPATIBLE VEHICLE OF SAME MODEL

(a) Check if track information is displayed normally on another "Bluetooth" audio compatible vehicle of the same model.

OK:

Track information is displayed normally.

OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

NG

PORTABLE PLAYER IS NOT COMPATIBLE

    READ NEXT:

     Noise Occurs or Sound Skips when Portable Player Plays

    CAUTION / NOTICE / HINT HINT: Perform this check with the portable player volume set at an appropriate level. Make sure that there are no obstructions between the portable player and the ra

     Portable Player cannot be Connected Manually/Automatically

    CAUTION / NOTICE / HINT HINT: Some versions of "Bluetooth" compatible audio players may not function properly, or the functions may be limited using the radio and display receiver assembly, even if th

     Registered Device cannot be Deleted

    PROCEDURE 1. DELETE OPERATION (a) Check if a registered portable player can be deleted normally. OK: Registered portable player can be deleted normally. OK END NG

    SEE MORE:

     Reverse Signal Circuit between Radio Receiver Assembly and Navigation ECU

    DESCRIPTION This circuit includes the navigation ECU and radio and display receiver assembly. WIRING DIAGRAM PROCEDURE 1. CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER ASSEMBLY - NAVIGATION ECU) (a) Disconnect the K1 radio and display receiver assembly connector. (b) Dis

     Throttle / Pedal Position Sensor / Switch "A" Circuit Short to Ground (P012011)

    DESCRIPTION The throttle position sensor is built into the throttle body with motor assembly and detects the opening angle of the throttle valve. This sensor is a non-contact type sensor. It uses Hall-effect elements in order to yield accurate signals even in extreme driving conditions, such as at h

    © 2023-2025 Copyright www.tocamry.com