Toyota Camry (XV70): Power Assist Systems
Toyota Camry Repair Manual XV70 (2018-2024) / Steering / Power Assist Systems
READ NEXT:
Precaution
PRECAUTION PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE: When disconnecting the cable from the negative (-) battery terminal, initialize the following system(s) after the
Parts Location
PARTS LOCATION ILLUSTRATION
*A w/ Forward Recognition Camera
*B w/ Smart Key System
*C w/o Smart Key System
*D w/ Drive Mode Switch
*1 FORWARD RECOGNITI
SEE MORE:
On-vehicle Inspection
ON-VEHICLE INSPECTION PROCEDURE
1. CONNECT TECHSTREAM (a) Connect the Techstream to the DLC3 with the ignition switch off.
(b) Start the engine and run it at idle. (c) Turn the Techstream on.
(d) Enter the following menus: Chassis / Brake / Active Test. HINT:
Refer to the Techstream operator
Disassembly
DISASSEMBLY PROCEDURE 1. REMOVE GENERATOR PULLEY CAP
(a) Using a screwdriver, remove the generator pulley cap from the generator pulley with clutch.
NOTICE:
Do not reuse the generator pulley cap.
If the generator pulley cap is removed, replace the generator pulley cap and generat
© 2023-2026 Copyright www.tocamry.com
