Toyota Camry owners & service manuals

Toyota Camry (XV70): Utility

UTILITY

REFRIGERANT HIGH PRESSURE HISTORY CLEAR

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Press the OFF switch.

(d) Turn the Techstream on.

(e) Enter the following menus: Body Electrical / Air Conditioner / Utility / Refrigerant High Pressure History Clear.

Body Electrical > Air Conditioner > Utility

Tester Display

Refrigerant High Pressure History Clear

REFRIGERANT SHORTAGE CHECK USING TECHSTREAM

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / Air Conditioner / Utility / Refrigerant Gas Volume Check.

Body Electrical > Air Conditioner > Utility

Tester Display

Refrigerant Gas Volume Check

(e) Check that the following conditions are met and perform the refrigerant shortage check according to the display on the Techstream.

Measurement Condition:

Item

Condition

A/C switch

On

Ambient temperature*

0 to 49°C (32 to 120°F)

Blower speed

HI

*: If the ambient temperature is not within the range shown, do not perform this check.

HINT:

  • Refer to the Techstream operator's manual for further details.
  • A message indicating a refrigerant shortage is displayed on the Techstream and the air conditioning system turns off if the amount of refrigerant in the system is insufficient.
  • DTCs are not stored when performing the refrigerant shortage check using the Techstream.
Result:

Result

Amount of Refrigerant

Corrective Action

Refrigerant shortage

Insufficient

  1. Check for refrigerant leaks using a halogen leak detector, and repair if necessary.
  2. Evacuate the air conditioning system and charge it with the appropriate volume of new or purified refrigerant.

    Click here

Refrigerant correct

Correct

-

    READ NEXT:

    SEE MORE:

     Parts Location

    PARTS LOCATION ILLUSTRATION *1 FAN WITH MOTOR ASSEMBLY - COOLING FAN MOTOR - COOLING FAN ECU *2 ECM *3 ENGINE ROOM RELAY BLOCK AND JUNCTION BLOCK ASSEMBLY - EFI-MAIN NO. 1 RELAY - -

     Wireless remote control/electronic key battery

    Replace the battery with a new one if it is depleted. You will need the following items: Flathead screwdriver Small flathead screwdriver Lithium battery CR2032 Replacing the battery Vehicles without a smart key system 1. Remove the key cover. To prevent damage to the key, cover the

    © 2023-2026 Copyright www.tocamry.com