Toyota Camry owners & service manuals

Toyota Camry (XV70): Data List / Active Test

DATA LIST / ACTIVE TEST

DATA LIST

NOTICE:

Some Data List values may vary significantly due to slight measurement errors, differences in the measurement environment, and changes in the vehicle over time, making it difficult to indicate clear evaluation standards. It is possible that a malfunction may be present even if measured values are within the reference range.

(a) Read the Data List according to the display on the Techstream.

Chassis > Lane Control > Data List

Tester Display

Measurement Item

Range

Normal Condition

Diagnostic Note

Total Distance Traveled

-

-

-

Cannot be used

Total Distance Traveled - Unit

-

-

-

Cannot be used

LDA Control

Whether lane tracing assist system control is permitted or not

Prohibit or Permit

Prohibit: Lane tracing assist system control not possible

Permit: Lane tracing assist system control possible

-

Turn Switch (Right)

Turn signal switch (right) status

ON or OFF

ON: Turn signal switch on (right)

OFF: Turn signal switch off (right)

-

Turn Switch (Left)

Turn signal switch (left) status

ON or OFF

ON: Turn signal switch on (left)

OFF: Turn signal switch off (left)

-

Vehicle Information (2WD/4WD)

-

-

-

Cannot be used

Vehicle Information (Conv/HV/EV)

-

-

-

Cannot be used

Not Holding Steering Wheel Judgment Status (Torque Sensor)

Judgement status by torque sensor of whether hands are not on steering wheel

Detected or Not Detected

Detected: Judgment of hands not on steering wheel detected

Not Detected: Judgment of hands not on steering wheel not detected

-

Not Holding Steering Wheel Judgment Status (Touch Sensor)

Judgement status by touch sensor of whether hands are not on steering wheel

Detected or Not Detected

Detected: Judgment of hands not on steering wheel detected

Not Detected: Judgment of hands not on steering wheel not detected

-

Driver Torque Input Steering Status

Status of steering torque input by driver

Detected or Not Detected

Detected: Steering input detected

Not Detected: Steering input not detected

-

Driver Torque Cancel Steering Status

Driver cancel steering input status

Detected or Not Detected

Detected: Cancel steering input detected

Not Detected: Cancel steering input not detected

-

ACTIVE TEST

HINT:

Using the Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

(a) Perform Active Test according to the display on the Techstream.

Chassis > Lane Control > Active Test

Tester Display

Measurement Item

Control Range

Diagnostic Note

Steering Wheel Vibration

-

-

Cannot be used

Meter Buzzer

Sounds the LTA buzzer (meter buzzer)

Start/Stop

Confirm that the vehicle is stopped with the ignition switch ON.

Body Electrical > Combination Meter > Active Test

Tester Display

Measurement Item

Control Range

Diagnostic Note

Multi Display All (White)

Multi-information display (White display)

ON

Confirm that the vehicle is stopped with the ignition switch ON.

    READ NEXT:

     Diagnostic Trouble Code Chart

    DIAGNOSTIC TROUBLE CODE CHART Lane Tracing Assist System DTC No. Detection Item Link U010087 Lost Communication with ECM/PCM "A" Missing Message U012587 Lost

     Vehicle Control History

    VEHICLE CONTROL HISTORY NOTICE: Make sure to record any output Vehicle Control History codes before clearing them and checking the Vehicle Control History again. CHECK VEHICLE CONTROL HISTORY (LANE

     Lost Communication with ECM/PCM "A" Missing Message (U010087,U012587,U012687,U012987,U013187,U015587)

    DESCRIPTION When a malfunction is detected between various ECUs and sensors, these DTCs are stored. DTC No. Detection Item DTC Detection Condition Trouble Area U010087 Lost Co

    SEE MORE:

     Front Radar Sensor Optical Axis Misalignment Malfunction (C1A1100)

    DESCRIPTION The millimeter wave radar sensor assembly performs self-diagnosis to check for misalignment of its beam axis. If misalignment is detected, the millimeter wave radar sensor assembly stores DTC C1A1100. DTC No. Detection Item DTC Detection Condition Trouble Area C1A1

     USB Audio System Recognition/Play Error

    DESCRIPTION When a USB device or "iPod" is connected to the USB jack of the No. 1 stereo jack adapter assembly, it must have playable files. The device must also communicate with and be recognized by the radio and display receiver assembly. This diagnostic procedure is for when a device is not recog

    © 2023-2025 Copyright www.tocamry.com