Toyota Camry owners & service manuals

Toyota Camry (XV70): Dtc Check / Clear

Toyota Camry Repair Manual XV70 (2018-2024) / Engine, Hybrid System / Cruise Control / Front Radar Sensor System / Dtc Check / Clear

DTC CHECK / CLEAR

CHECK FOR DTC

(a) Check for DTCs (Test Failed / Pending / Confirmed).

Body Electrical > Front Radar Sensor > Trouble Codes

Techstream Display

Description

Test Failed

Shows the malfunction judgment results during the current trip.

Pending

Shows the malfunction judgment results up to now. (Indicates the possibility of a malfunction when no DTC is confirmed.)

Confirmed

Shows the DTCs confirmed up to now. (The number of current trips differs for each DTC.)

HINT:

Freeze frame data is stored respectively for pending DTCs, confirmed DTCs and the latest DTCs.

CLEAR DTC

(a) Clear the DTCs.

Body Electrical > Front Radar Sensor > Clear DTCs

HINT:

DTCs and freeze frame data are cleared at the same time.

    READ NEXT:

     Freeze Frame Data

    FREEZE FRAME DATA DESCRIPTION (a) Whenever a front radar sensor system DTC is stored, the millimeter wave radar sensor assembly stores the current vehicle state as Freeze Frame Data. CHECK FREEZE FR

     Fail-safe Chart

    FAIL-SAFE CHART FAIL-SAFE FUNCTION (a) If a malfunction is detected in the front radar sensor system, a message is displayed on the multi-information display and systems related to the malfunction are

     Data List / Active Test

    DATA LIST / ACTIVE TEST DATA LIST NOTICE: In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a

    SEE MORE:

     Parts Location

    PARTS LOCATION ILLUSTRATION *A w/ Side Turn Signal Light - - *1 HEADLIGHT ASSEMBLY RH - TURN SIGNAL LIGHT *2 HEADLIGHT ASSEMBLY LH - TURN SIGNAL LIGHT *3 SIDE TURN SIGNAL LIGHT ASSEMBLY RH *4 SIDE TURN SIGNAL LIGHT ASSEMBLY LH *5 REAR COMBI

     Installation

    INSTALLATION CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH side and LH side. The following procedure is for the LH side. PROCEDURE 1. INSTALL REAR SUSPENSION SUPPORT ASSEMBLY (a) Secure the rear suspension support assembly in a vise using aluminum plates. NOTICE:

    © 2023-2026 Copyright www.tocamry.com