Toyota Camry (XV70): How To Proceed With Troubleshooting

CAUTION / NOTICE / HINT

HINT:

• Use the following procedure to troubleshoot the lighting system.
• *: Use the Techstream.

PROCEDURE

1.	VEHICLE BROUGHT TO WORKSHOP

NEXT

2.	CUSTOMER PROBLEM ANALYSIS

HINT:

• In troubleshooting, confirm that the problem symptoms have been accurately identified. Preconceptions should be discarded in order to make an accurate judgment. To clearly understand what the problem symptoms are, it is extremely important to ask the customer about the problem and the conditions at the time the malfunction occurred.
• Gather as much information as possible for reference. Past problems that seem unrelated may also help in some cases.
• The following 5 items are important points for problem analysis:

  What	Vehicle model, system name
  When	Date, time, occurrence frequency
  Where	Road conditions
  Under what conditions?	Driving conditions, weather conditions
  How did it happen?	Problem symptoms

NEXT

3.

PRE-CHECK

(a) Measure the battery voltage.

Standard Voltage:

11 to 14 V

If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.

(b) Check the fuses and relays.

(c) Check the connector connections and terminals to make sure that there are no abnormalities such as loose connections, deformation, etc.

NEXT

4.	CHECK COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*

(a) Using the Techstream, check for CAN communication system DTCs.

Click here

Result	Proceed to
CAN DTCs are not output	A
CAN DTCs are output	B

B

GO TO CAN COMMUNICATION SYSTEM

A

5.	CHECK FOR DTC*

(a) Check for DTCs.

Body Electrical > Main Body > Trouble Codes Body Electrical > Front Recognition Camera (Front Lighting Control) > Trouble Codes

Result	Proceed to
DTCs are not output	A
DTCs are output	B

B

GO TO DIAGNOSTIC TROUBLE CODE CHART

A

6.	CHECK VEHICLE CONTROL HISTORY*

(a) Using the Techstream, check for Vehicle Control History (RoB).

Body Electrical > Front Recognition Camera (Front Lighting Control) > Utility

Tester Display
Vehicle Control History (RoB)

NOTICE:

Make sure to record the output Vehicle Control History.

Result	Proceed to
Vehicle Control History codes are not output	A
Vehicle Control History code X2020 and/or X204D is output	B
Vehicle Control History codes other than X2020 and X204D are output	C

B

GO TO VEHICLE CONTROL HISTORY (Check Details of Code X2020 or X204D)

C

GO TO STEP 11

A

7.	PROBLEM SYMPTOMS TABLE

(a) Refer to Problem Symptoms Table.

Click here

Result	Proceed to
Fault is not listed in Problem Symptoms Table	A
Fault is listed in Problem Symptoms Table	B

B

GO TO PROBLEM SYMPTOMS TABLE

A

8.	OVERALL ANALYSIS AND TROUBLESHOOTING*

(a) Operation Check.

Click here

(b) Terminals of ECU.

Click here

(c) Data List / Active Test.

Click here

(d) On-vehicle Inspection.

(e) Inspection.

NEXT

9.	ADJUST, REPAIR OR REPLACE

NEXT

10.	CONFIRMATION TEST

NEXT

END

11.	CHECK VEHICLE CONTROL HISTORY*

(a) Clear Vehicle Control History

Body Electrical > Front Recognition Camera (Front Lighting Control) > Utility

Tester Display
Vehicle Control History (RoB)

(b) Check Vehicle Control History

Body Electrical > Front Recognition Camera (Front Lighting Control) > Utility

Tester Display
Vehicle Control History (RoB)

Result	Proceed to
Vehicle Control History (RoB) codes are not output	A
Vehicle Control History (RoB) codes are output	B

A

USE SIMULATION METHOD TO CHECK

B

GO TO VEHICLE CONTROL HISTORY

READ NEXT: