Toyota Camry (XV70): How To Proceed With Troubleshooting
CAUTION / NOTICE / HINT
HINT:
- Use the following procedure to troubleshoot the air conditioning system.
- *: Use the Techstream.
PROCEDURE
|
1. | VEHICLE BROUGHT TO WORKSHOP |
|
.gif)
| 2. |
CUSTOMER PROBLEM ANALYSIS |
HINT:
- In troubleshooting, confirm that the problem symptoms have been accurately identified. Preconceptions should be discarded in order to make an accurate judgment. To clearly understand what the problem symptoms are, it is extremely important to ask the customer about the problem and the conditions at the time the malfunction occurred.
- Gather as much information as possible for reference. Past problems that seem unrelated may also help in some cases.
- The following 5 items are important points for problem analysis:
What
Vehicle model, system name
When
Date, time, occurrence frequency
Where
Road conditions
Under what conditions?
Driving conditions, weather conditions
How did it happen?
Problem symptoms
|
| 3. |
INSPECT BATTERY VOLTAGE |
(a) Inspect the battery voltage.
Standard Voltage:
11 to 14 V
If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.
(b) Check the fuses and relays.
(c) Check the connector connections and terminals to make sure that there are no abnormalities such as loose connections, deformation, etc.
|
| 4. |
CHECK COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM* |
(a) Using the Techstream, check for CAN communication system DTCs.
Click here
.gif)
|
Result | Proceed to |
|---|---|
|
CAN communication system DTCs are not output |
A |
| CAN communication system DTCs are output |
B |
| B |
.gif) | GO TO CAN COMMUNICATION SYSTEM |
|
| 5. |
CHECK FOR DTC* |
(a) Check for DTCs and note any codes that are output.
Body Electrical > Air Conditioner > Trouble Codes(b) Clear the DTCs.
Body Electrical > Air Conditioner > Clear DTCs(c) Recheck for DTCs. Based on the DTCs output above, try to force output of the air conditioning system DTC by simulating the operation indicated by the DTC.
Body Electrical > Air Conditioner > Trouble Codes|
Result | Proceed to |
|---|---|
|
DTCs are not output | A |
|
DTCs are output | B |
| B |
| GO TO DIAGNOSTIC TROUBLE CODE CHART
|
|
| 6. |
CHECK AIR CONDITIONING CONTROL ASSEMBLY |
(a) Operate each switch on the air conditioning control assembly and check that the switches of the air conditioning system operate normally.
| NG | | GO TO PROBLEM SYMPTOMS TABLE |
|
| 7. |
CHECK BLOWER CONTROL |
(a) Operate the blower switch on the air conditioning control assembly and check that the blower control operates normally.
| NG | | GO TO PROBLEM SYMPTOMS TABLE |
|
| 8. |
CHECK AIR INLET CONTROL |
(a) Operate the recirculation/fresh switch on the air conditioning control assembly and check that the air inlet control operates normally.
| NG | | GO TO PROBLEM SYMPTOMS TABLE |
|
| 9. |
CHECK AIR OUTLET CONTROL |
(a) Operate the air outlet mode switch on the air conditioning control assembly and check that the air outlet control operates normally.
| NG | | GO TO PROBLEM SYMPTOMS TABLE |
|
| 10. |
CHECK COOLING FUNCTION |
(a) Operate the temperature adjustment switches on the air conditioning control assembly and check that cool air is blown from the registers.
| NG | | GO TO PROBLEM SYMPTOMS TABLE |
|
| 11. |
CHECK HEATER FUNCTION |
(a) Operate the temperature adjustment switches on the air conditioning control assembly and check that warm air is blown from the registers.
| NG | | GO TO PROBLEM SYMPTOMS TABLE |
|
| 12. |
USE SIMULATION METHOD TO CHECK |
Click here
|
| 13. |
CONFIRMATION TEST |
| NEXT | | END |
READ NEXT:
Customize Parameters
CUSTOMIZE PARAMETERS CUSTOMIZE AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System)
(a) Customizing with the Techstream.
NOTICE:
When the customer requests a change in a function, first
Initialization
INITIALIZATION INITIALIZATION SERVO MOTOR (a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON. (c) Press the OFF switch. (d) Turn the Techstream on.
(e) Enter the following me
Utility
UTILITY REFRIGERANT HIGH PRESSURE HISTORY CLEAR
(a) Connect the Techstream to the DLC3. (b) Turn the ignition switch to ON.
(c) Press the OFF switch. (d) Turn the Techstream on. (e) Enter the follow
SEE MORE:
RCTA (Rear Cross Traffic
Alert)
The RCTA function uses the BSM rear side radar sensors
installed behind the rear bumper. This function is intended to
assist the driver in checking areas that are not easily visible
when backing up.
System components
Multi-information display
Turning the RCTA function on/off.
Outside r
ABS Pump Motor Control Circuit Short to Ground (C052C11,C052C13,C052F14,C142719)
DESCRIPTION The ABS motor relay is built into the brake actuator assembly.
When the skid control ECU (brake actuator assembly) operates ABS, TRAC, VSC or brake assist, the ABS motor relay turns ON and drives the motor pump built into the brake actuator assembly.
DTC No. Detection Item
