Toyota Camry (XV70): Installation

Toyota Camry Repair Manual XV70 (2018-2024) / Vehicle Interior / Lighting (int) / Front Door Courtesy Switch / Installation

INSTALLATION

CAUTION / NOTICE / HINT

HINT:

Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.

PROCEDURE

1. INSTALL FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY

(a) Connect the connector.

(b) Using a T30 "TORX" socket wrench, install the front door courtesy light switch assembly with the screw.

Torque:

6.3 N·m {64 kgf·cm, 56 in·lbf}

2. INSTALL LOWER CENTER PILLAR GARNISH

Click here

3. CONNECT FRONT SEAT OUTER BELT ASSEMBLY

Click here

4. INSTALL LAP BELT OUTER ANCHOR COVER

Click here

5. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP

Click here

6. INSTALL REAR DOOR SCUFF PLATE

Click here

7. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP

Click here

8. INSTALL FRONT DOOR SCUFF PLATE

Click here

SEE MORE:

Data List / Active Test

DATA LIST / ACTIVE TEST DATA LIST HINT: Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be di

Components

COMPONENTS ILLUSTRATION *A for 2WD *B for RH Side *C for LH Side - - *1 NO. 1 FLOOR UNDER COVER *2 NO. 2 FLOOR UNDER COVER N*m (kgf*cm, ft.*lbf): Specified torque - - ILLUSTRATION *A for 2WD - -

Toyota Camry (XV70): Installation

READ NEXT:

SEE MORE:

Data List / Active Test

Components