Toyota Camry (XV70): On-vehicle Inspection

Toyota Camry Repair Manual XV70 (2018-2024) / Vehicle Interior / Heating / Air Conditioning / Condenser / On-vehicle Inspection

ON-VEHICLE INSPECTION

PROCEDURE

1. INSPECT COOLER CONDENSER ASSEMBLY

(a) If the cooler condenser assembly fins are dirty, clean them with water and dry them with compressed air.

NOTICE:

Do not damage the cooler condenser assembly fins.

(b) If any cooler condenser assembly fins are bent, straighten them using a screwdriver or pliers.

2. INSPECT FOR REFRIGERANT LEAK

(a) Using a halogen leak detector, check the pipe joints for refrigerant leaks.

(b) If a refrigerant leak is detected in a joint, check the torque of the bolt of the joint.

SEE MORE:

Installation

INSTALLATION PROCEDURE 1. INSTALL BLOWER ASSEMBLY (a) Engage the 2 guides and 2 claws. (b) Install the blower assembly to the air conditioning radiator assembly with the 2 screws. (c) Engage each guide. (d) Connect the connector. 2. INSTALL NO. 2 AIR DUCT Click here 3. INSTALL AIR CONDITION

Check For Intermittent Problems

CHECK FOR INTERMITTENT PROBLEMS CHECK FOR INTERMITTENT PROBLEMS HINT: A momentary interruption (open circuit) in the connectors and/or wire harness between the sensors and ECUs can be detected using the Data List function of the Techstream. (a) Turn the ignition switch off. (b) Connect the Techs

Toyota Camry (XV70): On-vehicle Inspection

READ NEXT:

SEE MORE:

Installation

Check For Intermittent Problems