Toyota Camry (XV70): Operation Check
Toyota Camry Repair Manual XV70 (2018-2024) / Vehicle Exterior / Door / Hatch / Fuel Lid Opener System / Operation Check
OPERATION CHECK
CHECK FUEL LID OPENER SYSTEM
NOTICE:
The operation check below is based on the non-customized initial condition of the vehicle.
(a) When any of the following conditions are met, check the fuel lid open operation.
- Ignition switch is off or ACC.
- Vehicle speed 5 km/h (3 mph) or less and shift lever in P.
- Vehicle speed 5 km/h (3 mph) or less and brake pedal depressed (stop light switch on).
- Vehicle speed 5 km/h (3 mph) or parking brake locked (electric parking brake switch indicator light illuminated).
READ NEXT:
Customize Parameters
CUSTOMIZE PARAMETERS CUSTOMIZE LUGGAGE COMPARTMENT DOOR OPENER SYSTEM
HINT: The following items can be customized.
NOTICE:
When the customer requests a change in a function, first make sur
Problem Symptoms Table
PROBLEM SYMPTOMS TABLE
HINT:
Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in or
Terminals Of Ecu
TERMINALS OF ECU CHECK INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY AND MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)
(a) Remove the main body ECU (multiplex network body ECU) from the instrument panel j
SEE MORE:
Freeze Frame Data
FREEZE FRAME DATA FREEZE FRAME DATA (a) Whenever DTCs are detected, the blind spot monitor sensor stores the current vehicle (sensor) state as freeze frame data.
CHECK FREEZE FRAME DATA (a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG). (c) Turn the blind spot monitor sy
Calibration
CALIBRATION DESCRIPTION (a) Refer to the table below and then perform the necessary operation according to the part to be replaced in order to perform calibration.
Parts to be Replaced / Operation
Necessary Operation
Skid control ECU (brake actuator assembly)
Perform acceler
© 2023-2026 Copyright www.tocamry.com
