Toyota Camry (XV70): Rear Package Tray Speaker
READ NEXT:
COMPONENTS ILLUSTRATION
*1 REAR DOOR OPENING TRIM WEATHERSTRIP LH
*2 REAR DOOR OPENING TRIM WEATHERSTRIP RH
*3 REAR SEAT CUSHION ASSEMBLY
*4 REAR SEAT CUSHION LOC
REMOVAL CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during r
INSPECTION PROCEDURE 1. INSPECT REAR STEREO COMPONENT SPEAKER ASSEMBLY
(a) With the speaker installed, check that there is no looseness or other abnormalities.
(b) Check that there is no foreign m
SEE MORE:
DISASSEMBLY PROCEDURE 1. REMOVE MAGNET STARTER SWITCH ASSEMBLY
(a) Remove the nut and disconnect the field coil lead wire from the magnet starter switch assembly.
(b) While holding the magnet starter switch assembly to the repair service starter kit, remove the 2 nuts.
DESCRIPTION When the engine switch is turned on (IG), the battery voltage is applied to the IGSW terminal of the ECM.
The output signal from the MREL terminal of the ECM causes a current to flow to the coil of the EFI-MAIN NO. 1 relay, closing the contacts and supplying power to terminals +B and +