DESCRIPTION
These DTCs are stored when a malfunction occurs in the CAN communication circuit.
|
DTC No. | Detection Item |
DTC Detection Condition | Trouble Area |
|---|---|---|---|
|
U0073 | Sending Malfunction (Navigation to APGS) |
CAN bus connection error |
CAN communication system |
|
U0100 | Engine ECU Communication |
CAN bus connection error |
CAN communication system |
|
U0129 | VSC(ECB)ECU Communication |
CAN bus connection error |
CAN communication system |
|
U0140 | Lost Communication with Body Control Module |
CAN bus connection error |
CAN communication system |
|
U0155 | Meter ECU Communication |
CAN bus connection error |
CAN communication system |
|
U0164 | Air Conditioner ECU Communication |
CAN bus connection error |
CAN communication system |
|
U0198 | Lost Communication with Telematic Control Module |
CAN bus connection error |
CAN communication system |
|
U023B | Lost Communication with Image Processing Module "B" |
CAN bus connection error |
CAN communication system |
|
U0265 | Lost Communication with Image Processing Sensor A |
CAN bus connection error |
CAN communication system |
|
U1110 | Clearance Sonar ECU Communication |
CAN bus connection error |
CAN communication system |
PROCEDURE
| 1. |
CHECK DTC |
(a) Clear the DTCs.
Body Electrical > Navigation System > Clear DTCs(b) Recheck for DTCs and check that no DTCs are output.
Body Electrical > Navigation System > Trouble CodesOK:
No DTCs are output.
| OK | |
USE SIMULATION METHOD TO CHECK |
| NG | | GO TO CAN COMMUNICATION SYSTEM |
Satellite Radio Broadcast cannot be Received
Satellite Radio Broadcast cannot be Selected or After Selecting Broadcast, Broadcast cannot be Added into Memory
Weather and traffic information cannot be obtained
Brake Switch "A" Circuit Short to Battery (P057112)
Maintenance data (fuel, oil level, etc.)