Toyota Camry (XV70): System Description
Toyota Camry Repair Manual XV70 (2018-2024) / Audio, Visual, Telematics / Garage Door Opener / Garage Door Opener System / System Description
SYSTEM DESCRIPTION
DESCRIPTION
(a) A maximum of 3 kinds of transmitter code based systems (example: garage doors, gates and entry gates) can be registered with the vehicle garage door opener. After registration, the vehicle garage door opener can mimic the signal of the transmitter systems and the original transmitters of each transmitter system are not needed.
READ NEXT:
Registration
REGISTRATION PROCEDURE 1. REGISTER TRANSMITTER CODE
HINT:
The vehicle garage door opener records transmitter codes for systems such as garage doors, gates, entry gates, door locks, home lighting
On-vehicle Inspection
ON-VEHICLE INSPECTION PROCEDURE
1. INSPECT GARAGE DOOR OPENER
(a) Press each garage door opener ("HomeLink") switch and check that the ("HomeLink") indicator light turns on. If one or more of
SEE MORE:
Communication Malfunction between ECUs Connected by LIN (B2785)
DESCRIPTION If the certification ECU (smart key ECU assembly) detects a communication error with an ECU connected to the certification bus lines for 7 seconds or more, DTC B2785 will be stored.
DTC No. Detection Item
DTC Detection Condition Trouble Area
B2785 Communication M
Installation
INSTALLATION PROCEDURE 1. INSTALL FUEL PUMP CONTROL ECU BRACKET
(a) Install the fuel pump control ECU bracket to the fuel pump control ECU with the 2 bolts.
Torque: 4.5 N·m {46 kgf·cm, 40 in·lbf} 2. INSTALL FUEL PUMP CONTROL ECU
(a) Install the fuel pump control ECU to the vehicle body wit
© 2023-2025 Copyright www.tocamry.com
